Juniper Networks J4300 - Manuals

Juniper Networks J4300 – Manual in PDF format online.

Manuals:

Manual Juniper Networks J4300

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - J4300 and J6300 Ser vices Router PIM Installation Instructions; Tools and Par ts Required; J-series Services Router User Guide; POWER ON; Removing a PIM

J4300 and J6300 Ser vices Router PIM Installation Instructions Tools and Par ts Required To replace a component, you need the following tools and parts: Electrostatic bag or antistatic mat Electrostatic discharge (ESD) grounding wrist strap Phillips (+) screwdriver, number 2 Replacing a PIM Physical...

Page 3 - Figure 1: Removing a PIM; Captive screws; LED blinks and then turns off.; Installing a PIM

7. Loosen the captive screws on each side of the PIM faceplate. 8. Grasp the handles on each side of the PIM faceplate and slide the PIM out of the router. Place it in the electrostatic bag or on the antistatic mat. 9. If you are not reinstalling a PIM into the emptied slot, install a blank PIM pane...

Page 4 - System Basics Command Reference; Figure 2: Installing a PIM; List of Technical Publications

J4300 and J6300 Ser vices Router PIM Installation Instructions 4. Tighten the captive screws on each side of the PIM faceplate. 5. Insert the appropriate cables into the cable connectors on the PIM. 6. If necessary, arrange the cables to prevent them from dislodging or developing stress points: Secu...

Juniper Networks Manuals