John Lewis JLWM1202 - Manuals

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door locked light 4 Door opening handle 5 Drain pump 6 Adjustable feet Door locked light It stays on during the whole programme indicating thatthe door is locked.When the light goes out, the door can be opened. Detergent d...

7 Unpacking All transit bolts and packing must be removed before using the appliance. Keep all packaging away from children. You are advised to keep all the transit bolts for re-usein case the machine is to be transported again. Using a spanner unscrew and remove the two rearbottom screws. Slide out...

9 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, removeany blanking plug that may be in place. Push the drain hose onto the spigot and secure with aclip if required, ensure a loop is formed in the drainhose (see diagram) to prevent waste from the sinkentering the washin...

10 It is essential that these appliances are not connectedto the surface water drainage system as this water isdischarged directly into a river or stream and maycause pollution.If you require any further advice please contact yourlocal water authority. Electrical connection Any electrical work requi...

11 1 Detergent dispenser drawer 2 Programme selector dial The programme selector dial is divided into thefollowing sections: • Cottons, • Synthetics, • Delicates • Wool Hand washing • Special programmes from “ Soak 30° ” to “ 30 Minute wash ” • Reset/Off programme Off The selector dial can be turned...

12 • “ Prewash” : select this option if you wish your laundry to be prewashed before the main wash ( not available for Wool and “ 30 Minute wash ”) . The prewash ends with a short spin at 650 rpm inprogrammes for cotton and synthetic fabrics,whereas in the programme for delicate fabrics thewater is ...

13 • The washing machine has stopped with water in the tub , at the end of the “ Soak 30° ” or a programme with the “ Quiet ” option: this is indicated by a flashing zero . • Delay start , a time value indicated in hours and selected by means of the relevant button. The delay time is displayed for 3...

14 • An alarm code indicates a fault in the machine operation (see the relevant chapter). 8 Programme phase indicator lights When you select a programme, the lights relevant tothe phases that form the programme light up. After you have started the programme, only the lightrelevant to the phase that ...

15 Programme information Soak 30° This is a special programme for heavily soiled laundry.The machine performs a soak of about 30 minutes at30°C. At the end of the soak time the machine willstop automatically with water left in the tub . The display will show a flashing zero.Pour the detergent for th...

16 Using the washing machine Before the first wash, we recommend that you pour 2 litresof water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Thenrun a cotton cycle at 95°C, without any laundry in themachine, to remove any manufacturing residue from thedr...

19 Hints & Tips on Washing Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-1...

20 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...

Washing programmes The “Economy Cottons 60 ° ” is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards.* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of...

24 • When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dryup spillage of water when removing the cover. • Remove any objects from the pump impeller byrotating it. • Put the cap back on the emergency emptying hose and place the latter back in its seat. • ...

25 Something Not Working Please carry out the following checks before contacting your local Service Force agent. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused byincorrect use or installation, a charge will be made even if the appliance is under guarantee...