John Lewis JLDWW 1201 - Manuals

Description of the appliance 5 1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop IN144

Function buttons: in addition to the dishwashing programme selected, the following functions can also be setwith the help of these buttons: - water softener setting, - deactivation/activation of the rinse aid dispenser, - the cancelling of a washing programme. Programme selection buttons: the select...

Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...

Filling with dishwasher salt Only use salt specifically designed for use indishwashers.All other types of salt not specifically designed for usein a dishwasher, especially table salt, will damage thewater softener.Only fill with salt just before starting one of thecomplete washing programmes.This wi...

● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and ...

The cutlery basket Long bladed knives stored in an upright position are apotential hazard.Long and/or sharp items of cutlery such as carvingknives must be positioned horizontally in the upperbasket.Take care when loading or unloading sharp itemssuch as knives. Removable knife basket Long and/or shar...

Adjusting the height of the upperbasket If washing very large plates you can load them in the lowerbasket after moving the upper basket to the higher position. To move to the higher position proceed asfollows: 1. Move the front runner stops (A) of the upper basket outwards and slide the basket out. ...

Detergent tablets Detergent tablets of different brands dissolve at differentspeeds. For this reason some detergent tablets cannotdissolve and develop their full cleaning power during shortprogrammes. Therefore please use long programmes whenusing detergent tablets, to ensure the complete removal of...

14 Washing programmes (2) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C p...

15 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Close the dishwasher door 4. Press the On/Off button The On/Off indicator light illuminates. 5. Setting and starting the programme To select a programme, press the button of ...

9. Unloading the dishwasher Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Water ma...

Clean the external surfaces of the machine and control panelwith a damp soft cloth. If necessary use only neutraldetergents. Never use abrasive products, scouring pads orsolvent (acetone, trichloroethylene etc....).Ensure that the seals around the door, the detergent andrinse aid dispensers are clea...

18 Something not working Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructionsgiven here, without calling out an engineer. ...a flashing fault code appears The dishwasher will not start or stops during operation The interventi...

...the wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate freely due to wrong arran...

Any electrical and/or plumbing work required toinstall this appliance should be carried out by aqualified electrician and/or plumber or competentperson. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and adrain. Fitting under a counter (kit...

Electrical connection This appliance must be earthed.The manufacturer declines any responsibility shouldthis safety measure not be observed. If the plug that is fitted to your appliance is not suitable forthe socket, it must be cut off and the appropriate plug fitted. ImportantThe wires on the mains...

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see"Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with saltand rinse aid respe...