John Lewis JLBIDW 901 - Manuals

1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket Description of the Appliance 5 IN155

6 Installation Technical specifications Dimensions Width 44.6 cm Height 81.8 - 87.8 cm Max depth 55.5 cm Max depth with open door 114 cm Electrical connection: Information on the electrical connection is given on the rating plate on the inner Voltage edge of the dishwasher’s door. Overall powerFuse ...

Water outlet hose connection The end of the drain hose can be connected in the followingways: 1. To the sink outlet spigot, securing it to the underside of the work surface.This will prevent waste water from the sink running into the machine. 2. To a stand pipe provided with vent-hole, minimum inter...

1. On/Off button 2. Programme selection buttons The selection of a washing programme occurs by pressing one ofthese buttons (see "Washing programmes chart" see page 21). 3. Delay start button This option allows the start of the programme to be delayedfrom 1 to 19 hours. 4. Indicator lights 5...

Audible signals Audible signals have been introduced to help indicate whichoperations the dishwasher is performing: - setting of the water softener - end of programme - intervention of an alarm due to malfunction Deactivation/activation of the audible signals The dishwasher must be switched off Fact...

Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...

b) Setting electronically The dishwasher must be switched off NOTE: the electronic setting of the water softener ispossible ONLY with the Multi-tab function deactivated. The dishwasher is factory set at level 5. 1. Press the On/Off button.The indicator lights of the programme selection buttons will ...

Rinse aid Rinse aid is automatically added during the last rinse, ensuringthorough rinsing, and spot and streak free drying.The dispenser, which is positioned inside the door, holds about110 ml of rinse aid, which is sufficient for 16 - 40 dishwashingprogrammes, depending upon the dosage setting. Fi...

● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and ...

Open the door and slide out the baskets to load the dishes. The lower basket The lower basket isdesigned to take saucepans,lids, plates, salad bowls,cutlery etc. Serving dishes and large lidsshould be arranged aroundthe edge of the basket,ensuring that the spray armscan turn freely. The two rows of ...

The upper basket The upper basket is designed for plates (dessert plates, saucers,dinner plates of up to 24 cmin diameter), salad bowls,cups and glasses.Arrange items on andunderneath the cup racks sothat water can reach allsurfaces.For taller items, the cupracks can be foldedupwards.Light items (pl...

Use of detergent Only use detergents specifically designed for usein dishwashers. Please observe the manufacturer’s dosing andstorage recommendations as stated on thedetergent packaging. Using no more than the correct amount ofdetergent contributes to reducing pollution. Fill with detergent 1. If th...

Concentrated detergent Modern detergents for dishwashers are almost exclusively low-alkaline concentrated detergents with natural enzymes in tabletform. Using 50°C washing programmes in conjunction with theseconcentrated detergents reduces pollution and is good for yourdishes, as these washing progr...

Washing Programmes 20 (1) "Automatic" washing programme During the "Automatic" washing programme the amount of soil on the dishes is determined by how cloudy the water is.If the appliance is partially loaded and the dishes lightly soiled,the "prewash", "main wash", an...

In this fully integrated appliance the controls are located on thetop of the door.When selecting a programme, the door needs tobe open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Press the On/Off button The indicator lig...

7. End of the washing programme The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme. When the washing programme has ended, the optical signal on the floor beneath the dishwasher’s door will turn off. Open the dishwasher door only when this opt...

You must disconnect the appliance from the electricity supply,before you can carry out any cleaning and maintenance work. External cleaning Clean the external surfaces of the machine and control panelwith a damp soft cloth. If necessary use only neutral detergents.Never use abrasive products, scouri...

If the dishwasher is not working correctly, please carry out the following checks, before contacting your local Service Force agent. Important! If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will bemade even if the applianc...