John Lewis JLBIDW 1200 - Manuals

1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket Description of the appliance 5

Electrical connection Any electrical work required to install this appliance should becarried out by a qualified electrician or competent person. WARNING:THIS APPLIANCE MUST BEEARTHED. The manufacturer declines any liability should thissafety measure not be observed. Before switching on, make sure t...

Digital display The digital display indicates: - the level of hardness to which the water softener is set, - if the dosage of rinse aid is activated/deactivated, - if the audible signals are activated/deactivated, - the approximate remaining time of the running programme, - the end of the programme ...

Audible signals Audible signals have been introduced to help indicate whichoperations the dishwasher is performing: - setting of the water softener - end of programme - intervention of an alarm due to malfunction Deactivation/activation of the audible signals The dishwasher must be switched off Fact...

Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...

b) Setting electronically The dishwasher must be switched off NOTE: the electronic setting of the water softener ispossible ONLY with the Multi-tab function deactivated. The dishwasher is factory set at level 5. 1. Press the On/Off button.The indicator lights of the programme selection buttons will ...

Rinse aid Rinse aid is automatically added during the last rinse, ensuringthorough rinsing, and spot and streak free drying.The dispenser, which is positioned inside the door, holds about110 ml of rinse aid, which is sufficient for 16 - 40 dishwashingprogrammes, depending upon the dosage setting. Fi...

● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and ...

Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates, saladbowls, cutlery etc. Serving dishes and large lids should be arranged around the edgeof the basket, ensuring that the spray arms can turn freely. The two row...

The upper basket The upper basket is designed for plates (dessert plates, saucers,dinner plates of up to 24 cm in diameter), salad bowls, cups andglasses. Arrange items on andunderneath the cup racks sothat water can reach allsurfaces. For taller items, the cupracks can be foldedupwards. Light items...

Use of detergent Only use detergents specifically designed for usein dishwashers. Please observe the manufacturer’s dosing andstorage recommendations as stated on thedetergent packaging. Using no more than the correct amount ofdetergent contributes to reducing pollution. Fill with detergent 1. If th...

Detergent tablets Detergent tablets from different manufactures dissolve atdifferent rates. For this reason, some detergent tablets do notattain their full cleaning power during short washing programmes.Therefore please use long washing programmes when usingdetergent tablets, to ensure the complete ...

Washing programmes 20 Programme Degree of soil and type of load Heavy soil.Crockery, cutlery,pots and pans Normal soil.Crockery andcutlery Normal soil.Crockery andcutlery Fresh soil.Crockery andcutlery Press the programme button Cycle description (4) Consumption values Hot prewashMain wash up to 70°...

In this fully integrated appliance the controls are located on thetop of the door.When selecting a programme, the door needs tobe open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Press the On/Off button The indicator lig...

8. Unloading the dishwasher Hot dishes are sensitive to knocks.The dishes should therefore be allowed to cool down before removing from the appliance. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Water may...

Clean the external surfaces of the machine and control panelwith a damp soft cloth. If necessary use only neutral detergents.Never use abrasive products, scouring pads or solvent (acetone,trichloroethylene etc....).Ensure that the seals around the door, the detergent and rinse aiddispensers are clea...

If the dishwasher is not working correctly, please carry out the following checks, before contacting your local Service Force Centre. Important! If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will bemade even if the applian...

...the wash results are notsatisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface.The baskets must not be overloaded. ● The spray arms do not rotate freely due to wrong arrange...