JIMCO 100.312UL WHITE - Manuals

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; REED AND SAVE THESE INSTRUCTIONS; Description; naturally produce a low level of ozone (O

IMPORTANT SAFETY INSTRUCTIONS REED AND SAVE THESE INSTRUCTIONS WARNING!!! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS OBSERVE THE FOLLOWING: • Before opening the appliance, it must be switched off, and unplugged from the socket to prevent being switched on accidentally. When the...

Page 3 - Intended use; Function

Intended use The MAC500s is intended to be used 24 hours a day. The recommended room size is 60 m3 (24 m2 with a ceiling height of 2,5 m). The unit should not be operated while situated on the floor but shouldbe placed as high as possible for maximum efficiency. The unit must not be operated without...

Page 4 - Operation Instructions

Lifetime of the lamps The lifetime of the JIMCO special lamp is around 8,000 operating hours. After the expiry of 8,000 operating hours, the efficiency of the lamp will be reduced, which means if the air is not purified as usual then the lamp should be replaced.8,000 operating hours, equals to appro...

Page 5 - Installation instruction; In the package

• 1x MAC500s (Multi Air Cleaner) • 2x Screws (in the bottom of the MAC500s) • 2x DIN Rail Brackets (in the box) • 1x DIN Rail (in the box) MAC500s Installation instruction In the package 1. Find a suitable place for your MAC500s Note: We recommends to place the MAC500s at least 200 mm. away from any...

Page 6 - See drawings on page 6-11

6 Installation instruction Wall mount your MAC500s 1. Find a suitable place for your MAC500s Note: We recommends to place the MAC500s at least 200 mm. away from any side obstacles on both sides of the MAC500s to ensure inlet and outlet air. It must be vertical installed. 2. Place the DIN rail on the...

Page 11 - Attach the lid (position 4) and install the

Lamp change: Disconnect the power to the MAC500s by unplugging (position 2) from the wall socket Remove the four screws (position 3) and remove the cover (position 4) Lift the lamp (position 5) out of lamp clip A (position 6) and lamp clip B (position 7) Pull the lamp (position 5) out of the socket ...

Page 13 - Contact; Mjølbyvej 7

Contact Lamp switch: Producer: JIMCO A/S - Denmark Mjølbyvej 7 – DK-5900 Rudkøbing +45 6251 5456 www.jimco.dk 13

Page 14 - Always stay safe

Always stay safe UV-C & Ozone Technology CVR/VAT No. DK 2500 0374 JIMCO A/S ∙ Mjølbyvej 7 ∙ DK - 5900 Rudkøbing ∙ Phone: +45 6251 5456 ∙ E -mail: [email protected] ∙ www.jimco.dk

JIMCO 100.312UL WHITE - Manuals

Manuals:

User Manual JIMCO 100.312UL WHITE

Summary