Jet JPL-358 - Manuals

7 Tool Rest Position the tool rest as close to the workpiece as possible. It should be slightly abov e the center line of the workpiece. Loosen the tool rest with the attached wrench (D, fig. 4) and slide tool rest to desired position. Re-tighten with wrench when finished with adjustment. Adjust the...

8 Installing & Removing Live Center 1. Clean the tapered shank of the liv e center (A, Fig. 7) and the inside of the quill (B, Fig. 7) on the tailstock. CAUTION Failure to clean the live center and quill can result in separation of the two, which can result in damage to the workpiece and possibl...

9 Installing Pen Mandrel Screw the mandrel (A, Fig. 10) into the threads in the headstock spindle and place the other end on the tip of the liv e center of the tailstock as shown. The barrel(s) of a pen can be placed between bushings, and held snug on the mandrel by the knurled nut (B, Fig. 10). If ...

11 Parts List for JPL-358 Pen Lathe Index Part No. No. Description Size Quantity ............ JPL358-HA................... Headstock Assembly (Items 1 thru 8)..... ............................................... 1 1 .......... JPL358-101.................. Headstock .....................................