Jet DC-1100C - Manuals

8 WARNING Read and understand the entire contents of this manual before attempting assembly or operation of the dust collector! Failure to comply may cause serious injury! Unpacking 1. Remov e all contents from the shipping carton. 2. Report any damage to your distributor. 3. Do not discard any ship...

9 Assembly 1. Install four casters to the under side of the base as pictured in Fig. 1. Thread the hex nut (B, Fig. 1) onto the caster shaft. Then slide the lock washer (A, Fig. 1) ov er the caster shaft. Thread the caster shaft into the threaded hole on the underside of the base, turn until snug. T...

11 7. Place the ring ov er the top of the plastic bag and fold ov er the bag approximately three inches, Figure 7. 8. Insert the snap ring (A, Fig. 8) of the collector bag into the bottom of the housing at an angle. 9. Pull down on the ring to make sure it “seats” in the housing. Note: make sure the...

13 Parts Breakdown for DC-1100C Dust Collector w/Canister Filter

14 Parts List for the DC-1100C Dust Collector w/Canister Filter Index Part No. No. Description Size Qty. 1 .......... 708739 ......................... Filter ...................................................... ............................................... 1 2 .......... 331052 ....................