Jet DC-1100A - Manuals - manualsarea.com

Page 3 - WARNING; Do not use outdoors or on wet surfaces.; SAVE THESE INSTRUCTIONS

3 WARNING 1. Read and understand the entire contents of this manual before attempting assembly or operation. Do not use this machine until proper training and knowledge has been obtained. 2. Do not leav e Dust Collector when plugged in. Unplug from outlet when not in use and before serv icing. 3. Do...

Page 4 - Grounding Instructions

4 Grounding Instructions Caution: This tool must be grounded while in use to protect the operator from electric shock. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an el...

Page 6 - On-Off Switch Padlock

6 On-Off Switch Padlock Model No. PB-1, Stock No. 709012 To safeguard your machine from unauthorized operation and to av oid accidental starting by young children, the use of a padlock is highly recommended. JET model PB-1 is av ailable from your local authorized JET distributor or by calling JET Eq...

Page 8 - Read and understand the entire contents of; Unpacking

8 WARNING Read and understand the entire contents of this manual before attempting assembly or operation of the dust collector! Failure to comply may cause serious injury! Unpacking 1. Finish remov ing all contents from the shipping carton. 2. Report any damage to your distributor. 3. Do not discard...

Page 9 - Install four casters to the under side of the

9 Assembly 1. Install four casters to the under side of the base as pictured in Fig. 1. Thread the hex nut (B, Fig. 1) onto the caster shaft. Then slide the lock washer (A, Fig. 1) ov er the caster shaft. Thread the caster shaft into the threaded hole on the underside of the base, turn until snug. T...

Page 11 - Electrical Connections; All electrical connections must be done by a; Turning the Machine On & Off

11 7. Slide the bag hanger hook (A, Fig. 7) through the top loop of the filter bag. Insert the hanger into the hanger bracket. Thread the retainer strap (B, Fig. 7) through the loops on the filter bag (C, Fig.7), and fasten to the collector housing. The retainer strap should be tight enough to prov ...

Page 12 - Maintenance; Cleaning the Filter Bag; CAUTION; filter bag from the housing.; Removing the Collector Bag; Turn the bag outside in and insert into the; Motor

12 Maintenance WARNING Never perform maintenace on this machine before turning switch off and removing plug from power source, unplug. Failure to comply may cause serious injury! Cleaning the Filter Bag CAUTION Wearing a particle mask/respirator for protection against fine dust particles during clea...

Page 13 - Parts Breakdown

Page 14 - Parts List for the DC-1100A; Index Part

14 Parts List for the DC-1100A Index Part No. No. Description Size Qty. 1 .......... 411035W ..................... Impeller Housing.................................... ............................................... 1 2 .......... 411026W ..................... Motor Bracket ............................

Page 15 - Wiring Diagram