Jet 505651 - Manuals - manualsarea.com

Page 2 - Warranty and Service

2 JAT-650,651 Screwdrivers Warranty and Service JET ® warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty l...

Page 3 - Safety warnings; General air tool warnings

JET 3 Safety warnings General air tool warnings 1. Read and understand this entire manual before attempting assembly or operation. 2. Read and understand all warnings posted on the tool and in this manual. Failure to comply with all of these warnings may cause serious injury. 3. Replace warning labe...

Page 4 - Specific warnings for Screwdrivers

4 JAT-650,651 Screwdrivers 23. Shut off air supply and discharge any residual pressure from tool before removing hose, making adjustments, changing accessories, or storing tool. 24. Make sure tool is switched off, and your finger off the trigger, before connecting to air supply. 25. Remove adjusting...

Page 5 - About this manual

JET 5 About this manual This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model JAT-650 and JAT-651 Pneumatic Screwdriver. This manual contains instructions on safety precautions, general operating procedures, maintenance procedures and parts breakdown....

Page 6 - Tool specifications

6 JAT-650,651 Screwdrivers Tool specifications Model number JAT-650 JAT-651 Stock number 505650 505651 Chuck size and type 1/4 in. hex bit; positive clutch 1/4 in. hex bit; positive clutch Horsepower 1/2 1/2 Maximum torque 145 lbf•ft (196.6 N•m) 115 lbf•ft (155.9 N•m) Free speed 800 RPM 1800 RPM Ave...

Page 7 - Maintenance; Lubrication; Storage

JET 7 Setup and Assembly Any missing parts or damage should be reported immediately to your JET ® distributor. Do not use a damaged tool. Read this instruction manual thoroughly for operation, maintenance and safety instructions. Box contents: 1 Pneumatic screwdriver 1 Operation and parts manual 1 W...

Page 8 - Rule of Thumb

8 JAT-650,651 Screwdrivers 2. Make sure air compressor supplies clean, dry air at correct CFM for the tool. 3. Set air pressure to 90 psi. Excess air pressure and/or unclean air will shorten the tool’s life and may create a hazardous situation. 4. Drain water from air compressor tank daily, as well ...

Page 11 - Replacement parts

JET 11 Replacement parts Service parts are listed on the following pages. To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Please have the stock number and serial number of your tool available when you call, so that we may serve y...

Jet 505651 - Manuals

Manuals:

User Manual Jet 505651

Summary