Jet 505403 - Manuals - manualsarea.com

Page 2 - Warranty and Service

2 JAT-403 Angled Die Grinder Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty...

Page 3 - Safety warnings; General air tool warnings

JET 3 Safety warnings General air tool warnings 1. Read and understand this entire manual bef ore attempting assembly or operation. 2. Read and understand all warnings posted on the tool and in this manual. Failure to comply with all of these warnings may cause serious injury. 3. Replace warning l...

Page 4 - Specific warnings for Die Grinders

4 JAT-403 Angled Die Grinder 20. Do not use power tools in damp or wet location, or expose them to rain. Keep work area well lighted. 21. Do not leave a connected tool unattended. W hen not in use, disconnect tool from air source. 22. Shut off air supply and discharge any residual pressure from to...

Page 5 - About this manual

JET 5 About this manual This manual is provided by JET, covering the saf e operation and maintenance procedures f or a JET Model JAT-403 Pneumatic 90-degree Angled Die Grinder. This manual contains instructions on saf ety precautions, general operating procedures, maintenance procedures and parts ...

Page 6 - Tool specifications

6 JAT-403 Angled Die Grinder Tool specifications Model number JAT-403 Stock number 505403 Head angle 90 deg. Collet size 1/4 in. Horsepower 0.3 Free speed 22,000 RPM Average air consumption 3 CFM Air inlet 1/4 in. NPT Air hose inside diameter 3/8 in. Required air pressure 90 psi (621 kPa) Vibratio...

Page 7 - Maintenance; Lubrication

JET 7 Setup and Assembly Any missing parts or damage should be reported immediately to your JET ® distributor. Do not use a damaged tool. Read this instruction manual thoroughly for operation, maintenance and saf ety instructions. Box contents: 1 Die grinder 2 W renches 1 Operation and parts manua...

Page 10 - Troubleshooting JAT-403, 90° Angle Die Grinder

10 JAT-403 Angled Die Grinder Troubleshooting JAT-403, 90° Angle Die Grinder Any disassembly of the tool should be done by qualified service personnel. For problems not addressed below, contact JET technical service at 800-274-6846. Problem Possible cause Remedy Tool will not start. Air valve clos...

Page 11 - Replacement parts

JET 11 Replacement parts Service parts are listed on the f ollowing pages. T o order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Please have the stock number and serial number of your tool available when you call, so that we may ser...

Jet 505403 - Manuals

Manuals:

User Manual Jet 505403

Summary