JENSEN SRP2002 - Manuals - manualsarea.com

Page 2 - Location and Mounting; Características; Localización y montaje

SRP2002 2 Features The compact, portable design of the SRP2002 Plug-N-Play makes it easy to use, and its convenient carrying case allows for quick transfer between multiple vehicles. The SRP2002 consists of two main components: a Down Link Processor (DLP) and a Display Control Unit (DCU). The DLP ac...

Page 3 - Wiring; Down Link Processor; Display Control Unit; Adaptor de la Energía

SRP2002 3 Location and Mounting (continued) Display Control Unit The DCU comes with a cradle designed to be mounted on the dash, allowing easy access for operating the unit. The cradle can be mounted with two screws or with a strip of velcro, both of which are included in the Plug-N-Play case. Once ...

Page 5 - Mounting the Antenna; Mounting Location; Montar la Antena; Localización del Montaje; Routing Antenna Cables; Confirmation Channel; Encaminar los Cables de la Antena; Canal de la Confirmación

SRP2002 5 Mounting the Antenna The antenna allows the radio to receive both terrestrial and satellite signals. Before using the radio, make sure the antenna connector is plugged into the DLP and the antenna is properly mounted on the outside of the car. Mounting Location The antenna is designed to b...

Page 6 - Operation; Configuration Setting; Operación; Configuración

SRP2002 6 Operation Power On Press the POWER button to turn the unit on. The unit will run a diagnostic check. The Sirius logo appears temporarily, and the display will read "ACQUIRING SIGNAL" while it tunes to a channel. Note: On initial power up, allow at least five minutes for the Down Li...

Page 8 - Direct Mode; Seek Tuning; Modo Directo; El Templar Manual

SRP2002 8 Configuration Setting (continued) Change S Code The user security code, referred to as the S code, is a four-digit code used to set, access and clear parental locks on selected stations. The default value is set to “0000” and may be changed at any time. To change the S code, complete the f...

Page 10 - Category Mode; Modo Categoria

SRP2002 10 Category Mode Manual Tuning Press the tuning button to select a channel within a category. Note: When tuning channels within a category, the tuning button will only tune in channels within that particular category. Seek a Category 1. Press and hold the tuning button up or down for more th...

Page 11 - Parental Lock Out

SRP2002 11 Parental Lock Out The parental lock out feature allows a user to lock out selected stations so they may only be accessed by using the S code. Setting Channel Lock Out To set channel lock out, complete the following steps: 1. Access the desired channel. 2. Press Select , and enter “999”. 3...

Page 13 - Troubleshooting; Diagnóstico de averías

SRP2002 13 Troubleshooting * Note: Man-made objects (metal truss-type bridges, tall buildings, tunnels, etc.) and natural objects (mountains, canyons, valleys, etc.) can cause a loss of satellite and terrestrial signals momentarily. If the signal is lost, the DLP will try and reacquire the satellite...

Page 14 - Specifications; Warranty; Especificaciones; Garantía

SRP2002 14 Specifications Power supply10.8-15.6 Vdc, negative groundAudio Out (DLP)400 mVRMS @ 10K ohmsFuses2 (2 amp) fast blowDCU Dimensions4.5" x 3.5" x 1" (114mm x 89mm x 25mm)DLP Dimensions6.5" x 4.25" x 1" (165mm x 108mm x 25mm) Specifications subject to change without n...