JENSEN JMD200 - Manuals - manualsarea.com

Page 2 - ii; CONTENTS

JMD200 ii CONTENTS System Features ................................................................................................. 1 Safety Information .............................................................................................. 2 Installation .......................................

Page 3 - SYSTEM FEATURES; Content List

JMD200 1 SYSTEM FEATURES Features of the Jensen JMD200 mobile audio system include:• AM/FM Tuner with 30 Presets (12 AM, 18 FM) • Single In-Dash CD Player • Mute • Electronic Bass, Treble, Balance and Fader Controls • Clock Content List • Jensen Main Chassis • Hardware Kit • Wiring Harnesses (4-pin ...

Page 4 - SAFETY INFORMATION; DISC NOTES; Disc Maintenance; Insert label

JMD200 2 SAFETY INFORMATION When Driving Keep the volume level Iow enough to be aware of the road and traffic conditions. When Washing your Vehicle Do not expose the product to water or excessive moisture. Moisture can cause electrical shorts, fire or other damage. When Parked Parking in direct sunl...

Page 5 - INSTALLATION; Before You Begin; Disconnect Battery; Important Notes; Kit Installation

JMD200 3 INSTALLATION Before You Begin 1. Disconnect Battery Before you begin, always disconnect the battery negative terminal. 2. Remove Transport Screws Important Notes • Before final installation, test the wiring connections to make sure the unit is connected properly and the system works. • Use ...

Page 6 - Wiring Diagram

Page 7 - Reconnecting the Battery; Removing the Unit

JMD200 5 Reconnecting the Battery When wiring is complete, reconnect the battery negative terminal. Removing the Unit To remove the radio after installation, insert the removal keys straight back until they click, and then pull the radio out. If removal keys are inserted at an angle, they will not l...

Page 8 - BASIC OPERATION; Volume Control; Reset; PUSH POWER

JMD200 6 BASIC OPERATION Power On/Off Press the rotary encoder POWER button (1) to turn the unit on. Press and hold to turn the unit off. The unit will resume at the last mode selected (Tuner, Aux, etc.). Volume Control To increase the volume, turn the rotary encoder (1) to the right. To decrease th...

Page 10 - TUNER OPERATION; Select a Band; BND; Manual Tuning; Preset Stations

JMD200 8 TUNER OPERATION Select a Band Press the BND button (3) to change between three FM bands and two AM bands. • During FM operation, when the station is broadcasting in stereo, the stereo icon ( ) appears on the display. • During AM operation, no indications are displayed. Manual Tuning Press t...

Page 11 - CD PLAYER OPERATION; Inserting and Ejecting a Disc

JMD200 9 CD PLAYER OPERATION Inserting and Ejecting a Disc Insert a disc, label-side up, into the disc slot (7). The unit will automatically draw the disc in and play the first track on the disc, whether the power was turned on or not. Press the eject button (9) to stop disc play and eject the disc....

Page 12 - CARE AND MAINTENANCE; Ignition; TROUBLESHOOTING; Symptom; RESET

JMD200 10 CARE AND MAINTENANCE • Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. • Keep the product away from dust and dirt, which can cause premature wear of parts. • Handle the product gently and carefully....

Page 13 - SPECIFICATIONS

JMD200 11 SPECIFICATIONS CD Signal to Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 55 dBChannel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . : More than 50 dBFrequency Response . . ...