JENSEN JiSS-100 - Manuals - manualsarea.com

Page 2 - WARNING; CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY; contain any parts that can be repaired by the user.; DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS; IMPORTANT SAFETY INSTRUCTIONS; dangerous; ” inside the; CAUTION; RISK OF ELECTRIC SHOCK

1 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: PLEASE READ AND OBSERVE ALL...

Page 3 - receptacles and the point where they exit from the apparatus.

2 IMPORTANT SAFETY INSTRUCTIONS (Continued) 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including am...

Page 4 - marks or a rubber residue on the furniture.

3 FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

Page 5 - WELCOME; Thank you for purchasing the JENSEN JiSS-100 Docking System.; LOCATION OF CONTROLS

4 WELCOME Thank you for purchasing the JENSEN JiSS-100 Docking System. Before operating the unit, please read this manual thoroughly and retain it for future reference. LOCATION OF CONTROLS 1. FUNCTION (iPod / AUX / FM / AM) 2. POWER ON/OFF 3. TUNING DOWN / Button 4. 30-PIN Connector 5. MEMORY/PLAY/...

Page 6 - POWER SOURCE; could cause damage to the unit and void your warranty.; B. Battery Operation; inside the battery compartment.; Battery Precautions; Do not mix old and new batteries; Use only the size and type of battery specified.; Battery Replacement

5 POWER SOURCE This JiSS-100 Docking System operates on AC120V~ 60Hz line power or on 4 “AA” (UM-3) batteries (Not included). Do not attempt to operate the radio with any other power source. You could cause damage to the unit and void your warranty. Please be sure the power outlet you plug this unit...

Page 7 - RADIO OPERATION; Note:; To Preset Channels; TUN UP; Flat

6 RADIO OPERATION 1. Press the Button to turn on the unit. 2. Press the FUNCTION Button to operate the unit in AM or FM mode. : S S E R P : O T Scan radio station automatically TUN UP / or TUN DN/ Buttons and hold for 1 second Stop auto-tuning TUN UP / or TUN DN/ Buttons again Scan radio station man...

Page 8 - To Receive Preset Stations; AUX OPERATION; iPod ADAPTORS; DOCKING YOUR iPod; Power

7 To Receive Preset Stations 1. Press the Button to turn on the unit. 2. Press the FUNCTION Button to operate the unit in AM or FM mode. 3. To listen to your desired station, press the MEMORY Button once. Preset Channel “P-01” will appear in the LCD. 4. Press the TUN UP / or TUN DN/ Buttons repeated...

Page 9 - VOLUME; CARE AND MAINTENANCE; Cleaning the Unit

8 Note: The iPod will only charge when the JiSS-100 is using an AC power source. 5. Adjust the sound level by pressing the VOLUME / Buttons on the JiSS-100. Note : The volume level cannot be adjusted using the volume control on your iPod after being docked. 6. Press the or Buttons to skip to the pre...

Page 10 - SPECIFICATIONS; DC 6V, “AA” (UM-3) X 4; TROUBLESHOOTING GUIDE

9 SPECIFICATIONS Power requirement ………………....…… AC 120V ~ 60Hz 15 W DC 6V, “AA” (UM-3) X 4 Frequency Range………...………......….. AM 530 - 1710 kHz FM 87.5 - 108 MHz Power output …………………….......……1.5W x 2 Speaker loading………………….....……. 8 Ohm x 2 iPod is a trademark of Apple Inc., registered in the U.S. a...

Page 11 - 0 DAY LIMITED WARRANTY AND SERVICE; Printed in China

0 1 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S. A ONLY SPECTR A MERCHANDISING INTERN ATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within t...