JENSEN JiMS-198i - Manuals

JENSEN JiMS-198i – Manual in PDF format online.

Manuals:

Manual

Manual JENSEN JiMS-198i

Summary

Page 2 - • Set the dial and leave it there.; We Want You Listening For a Lifetime:; DEAR JENSEN® CUSTOMER

1 Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group w...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS

2 When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these ins...

Page 4 - IMPORTANT NOTES; Avoid installing the unit in locations described below:

3 15. IMPORTANT NOTES Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 16. 17. 18. Avoid installing the unit in locations desc...

Page 5 - Caution; COMPLIANCE WITH FCC REGULATIONS

4 This equipment has been tested and found to comply with the limits for a Radio Receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio...

Page 6 - POWER SOURCE

5 AC-DC ADAPTOR CONNECTION The unit is powered by an external AC - DC Power Adaptor with an output of 10V DC - 1400mA (included).(1) Firmly and securely plug the adaptor's AC plug into a household AC wall adaptor.(2) Insert the adaptor's DC output plug into the DC -IN jack on the back of the unit. B...

Page 7 - IMPORTANT; BATTERY INSTALLATION

6 Open the battery compartment door on the bottom of the cabinet. Insert 2 “AA” size batteries into the battery compartment according to the polarity diagram engraved inside the compartment.Replace the battery compartment Door. IMPORTANT :Be sure that the batteries are installed correctly. Wrong pol...

Page 8 - LOCATION OF CONTROLS AND INDICATORS

7 LOCATION OF CONTROLS AND INDICATORS 15. MONO / STEREO / PLAY / PAUSE BUTTON 8 1 0 11 1 1 2 6 1 6 3 1 5 7 9 1 3 1 4 4 5 2 17 18 1. SHUFFLE / PRESET- BUTTON2. REPEAT / PRESET+ BUTTON3. MEMORY / SET BUTTON4. TUNE+ / UP BUTTON5. TUNE- / DOWN BUTTON6. SNOOZE BUTTON7. NAP BUTTON 8. ALARM 1 BUTTON9. ALAR...

Page 10 - OPERATING INSTRUCTIONS; AUTO TIME SET; Do not change this setting unless you live in an area which does not; PST MST CST EST

9 OPERATING INSTRUCTIONS AUTO TIME SET This unit features an Automatic Time Set system powered by 2 X “AA” batteries (3V DC) (Included), so you will not need to set the clock time when first plugged in. After the unit is plugged in, the LED display will show the time automatically. You will only nee...

Page 11 - RADIO OPERATIONS; SETTING THE CLOCK; NOTE

10 RADIO OPERATIONS SETTING THE CLOCK In case the back-up batteries are accidentally removed. You will need to set the clock manually. If the LED display is blinking1. In standby mode, press the UP button to increase or press the DOWN button to decrease the minutes setting. 2. Press and hold the UP ...

Page 13 - ” shows on LED display and; OTHER iPod / iPhone CONTROL FUNCTION KEYS; LISTENING TO iPod AND iPhone

12 PLAYBACK 1. To play your iPod, insert the adaptor included with your iPod into the docking bay area. To play your iPhone, insert the included adaptor into the docking bay area. Your iPod / iPhone can now be docked by placing the connector on the bottom of the iPod / iPhone onto the connector in t...

Page 14 - ALARM OPERATIONS

13 Insert the plug of your headphones (not included) into the Headphone jack, on the back of the unit and you can now listen in private. When using headphones, the speakers will be disconnected automatically. NOTE: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES 1. Avoid extended play a...

Page 15 - WAKE TO iPod or iPhone

14 NOTE : The last radio station you listen to will be the same station you will wake to. 3. The radio will automatically turn on and the ALARM indicator will flash when the alarm time is reached. The volume starts softly and becomes gradually louder.4. The radio alarm will keep sounding for 60 minu...

Page 16 - SNOOZE OPERATION

15 You may active the SNOOZE function manually after the alarm sounds by pressing the SNOOZE button. The snooze time can be adjusted from 1 ~ 30 minutes. The default snooze time setting is 9 minutes. SNOOZE TIME SETTING: 1. In standby mode, press and hold the SNOOZE for 3 seconds, the display shows ...

Page 17 - AuH; SLEEP TIEMR OPERATION

16 The Sleep Timer allows you to set the unit automatically power off after a selected sleep time duration is set. Sleep time function can be set from 1 minute to 120 minutes. 1. In unit power ON mode, press the SLEEP button to enter SLEEP setting. LED flashing and showing “90”. Press the SLEEP butt...

Page 18 - Resetting the Unit; CAUTION: DO NOT USE SHARP, POINTED OBJECT TO PRESS THE RESET; CARE AND MAINTAINANCE

17 Note: If you connected the Line Out Jack of your external device then you only need to adjust the volume control of this system. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this s...

Page 19 - TROUBLESHOOTING GUIDE

18 TROUBLESHOOTING GUIDE Symptom The unit does not respond (no power) iPod / iPhone does not respond to the speakersystem iPod / iPhone does not charge up AM band is too noisy Sound is distorted Unit gets warm after extended play at high volume This is normal. Turn the unit off for a period of time ...

Page 20 - AM 520 – 1710 kHz, 10 kHz tuning step; SPECIFICATIONS

19 Power Supply Power Adaptor (included): Input: AC120V ~60Hz Output: DC10V, 1400mA Battery Back-up for Clock: 2 X DC1.5V ‘AA’ (UM-3) Frequency Range AM 520 – 1710 kHz, 10 kHz tuning step FM 87.5 – 108 MHz, 0.1 MHz tuning step "Made for iPod" means that an electronic accessory has been desig...