JENSEN JiMS-182 - Manuals - manualsarea.com

Page 2 - IMPORTANT INSTRUCTIONS; – Consult the dealer or an experienced radio/TV technician for help.

1 IMPORTANT INSTRUCTIONS 1. Do not install the system near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 2. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point ...

Page 3 - STANDBY

2 IMPORTANT NOTES Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. Dusty, humid or moist places. Places subject to constant vibration. PROTECT YOUR FURNITURE This system is equipped with non-skid...

Page 4 - Display Segment; SETTING UP AND CONNECTING; OPERATION

3 Display Segment SETTING UP AND CONNECTING This Portable Docking System is designed to operate on 4 x 1.5V ‘AA’ (UM-3) batteries (Not included) or the included AC Adaptor. A Lithium battery (Included) is also required for the backup of the clock. A. BATTERY OPERATION For outdoor or portable use, in...

Page 5 - B. AC Adaptor Operation; not in use for a long period of time.; C. ACTIVATING THE BACKUP FUNCTION; SETTING THE CURRENT TIME; Current Time Setting

5 batteries at the same time as soon as possible to avoid battery leakage. B. AC Adaptor Operation 1. Insert one end of the AC adaptor into the DC Jack on back of JiMS-182. 2. Connect the AC plug of the AC adaptor to an AC 120V~ 60Hz power source. Note: The batteries will be automatically disconnect...

Page 6 - TUNER OPERATION

6 Press the MEMO./SET button once. “12H” will appear and flash in the display. 2. Press or b utton once to select 24 Hour format (24 H) if desired. 3. Press the MEMO./SET button again to save the hour format setting. The Hour digit will blink. 4. While the Hour digit blinks, press or button repeated...

Page 7 - AUX OPERATION; iPod ADAPTORS

7 1. Press the POWER/ STANDBY button to turn the unit on. 2. Press the / BAND button to select AM or FM band as desired. 3. Briefly press the ALM.2/MEM+ or ALM.1/ MEM- Button to select the preset channels. TIPS FOR BEST RECEPTION 1. Automatic tuning depends on the signal strength of the broadcasting...

Page 8 - To place the iPod adapter; DOCKING YOUR iPod; ALARM OPERATION; Alarm Time Setting

8 For nano 3 rd generation For nano 4 th generation For iTouch 2 nd generation It is always recommended you use the adaptor that comes with your iPod first. This will help maximize a custom fit for your iPod when docked. To place the iPod adapter 1. Select an adaptor and gently place it into the doc...

Page 10 - SLEEP OPERATION

10 Stopping the Alarm The alarm is programmed to continuously sound for 60 minutes. To stop the alarm, follow the directions below. 1. SNOOZE / DIMMER Button – Press this button to stop the alarm temporarily. The alarm will stop and automatically resume after 9 minutes. 2. POWER/ STANDBY Button – Pr...

Page 11 - CARE AND MAINTENANCE

11 Turn on the JiMS-182 on and select either iPod, Radio or AUX function. 1. Press the SLEEP Button repeatedly until the desired sleep time is shown on the Display. For example, if it is 10:00 PM and you set the sleep time for 30 minutes, the display will show: Preset Sleep Time Current time 2. The ...

Page 12 - SPECIFICATIONS

12 Symptom Possible Cause Solution Radio Station is not tuned properly for AM or FM. Fine-tune the AM or FM broadcast station. FM: The broadcast station signal is weak Find another station or relocate the unit until the best reception is obtained. Noise or sound distorted on AM or FM broadcasting. A...

Page 13 - TUNER SECTION; KHz; AUDIO SECTION; generation and iPod touch 2; 0 DAY LIMITED WARRANTY AND SERVICE

13 included) CR2025 x 1 (Included) for memory back-up Dimension ------------------------- ------------ 6-7/8(W) x 7-1/2(D) x 1-7/8(H) Inch/ 174(W) x 190 (D) x 47(H) mm Weight ------------------------------------------- 1.32 lb/0.6kg TUNER SECTION Frequency range ----------------------------- FM: 87....