JENSEN JCR-260 - Manuals - manualsarea.com

Page 2 - To establish a safe level:; Start your volume control at a low setting.; Once you have established a comfortable sound level:; Set the dial and leave it there.; We Want You Listening For a Lifetime

1 Dear JENSEN ® Customer Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consu...

Page 3 - WARNING; The Caution Marking is located at the bottom of apparatus.; IMPORTANT SAFETY INSTRUCTIONS

2 WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the bottom of apparatus...

Page 5 - COMPLIANCE WITH FCC REGULATION; cause undesired operation.; CAUTION; IMPORTANT NOTES; Avoid installing the unit in locations described below:

4 COMPLIANCE WITH FCC REGULATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired op...

Page 6 - DC 9V battery to the Battery Clip located inside.; IMPORTANT; rupture and leak. (Follow battery manufacturer’s directions.; POWER FAILURE INDICATOR

5 POWER SOURCE This unit is designed to operate on 120V ~ 60Hz AC house current. Operating this unit on any other power source may cause damage to the unit, and such damage is not covered by your warranty. It is also equipped with a battery back-up system for the clock that is powered by an optional...

Page 7 - LOCATION OF CONTROLS AND INDICATORS; FUNCTION SELECTOR

6 LOCATION OF CONTROLS AND INDICATORS 1. CLOCK/ALARM TIME SLOW SET BUTTON 11. SNOOZE BUTTON 2. CLOCK/ALARM TIME FAST SET BUTTON 12. DIAL POINTER 3. ALARM OFF BUTTON 13. LED DISPLAY 4. AM/FM BAND SELECTOR 14. TUNING KNOB 5. ALARM 1/2 SELECTOR 15. SPEAKER 6. FUNCTION SELECTOR (ON/OFF/AUTO/ALARM 16. AU...

Page 8 - SETTING THE CLOCK; NOTE; LISTENING TO THE RADIO; position to turn the radio off.; TIPS FOR BEST RADIO RECEPTION; location of the antenna until you find the strongest signal.; CHARGING YOUR SMART PHONE; Unplug the cable if your smart phone has been fully charged.; Note

7 SETTING THE CLOCK When you connect the radio to an AC outlet for the first time the clock display will begin flashing "12:00". The flashing will stop when you set the time. 1. Press and hold the TIME SET button and then press the FAST button to set the coarse time. 2. Press and hold the TI...

Page 9 - ALARM OPERATION; coarse wake up time.; and then shut off automatically.

8 This unit features an AUX IN jack for connecting your iPod, MP3 player or other digital music player. 1. Connect the headphone jack of your external device to the AUX IN jack located on the back of the JCR-260 (cable not included). 2. Turn the JCR-260 on and it will enter the AUX function mode onc...

Page 11 - selected and then to turn on at the preset “Alarm Time”.; CARE AND MAINTENANCE; dusting sprays or polishes on the cabinet.; 0 DAY LIMITED WARRANTY AND SERVICE

10 1. Slide the FUNCTION SELECTOR to “ON” position and select the band, station, and volume level that you wish to hear when the alarm comes 'On', then slide the FUNCTION SELECTOR to the “AUTO” position. The alarm INDICATOR will light up. 2. Follow steps 2 to 4 in “SLEEP TO MUSIC” section above to s...