JENSEN BT380 - Manuals

2. Installation This section demonstrates how to set up and install the BT380 into a vehicle. n Installing the Junction Box The Car Kit is designed to work with the 12/24-volt power supply of the vehicle. Refer to the following to install the junction box in a vehicle. 1. Locate a suitable place ins...

2. Installation o Connecting the Power Supply (For Options 1 and 2 only) The following illustration demonstrates how to connect the Car Kit’s power cables to the vehicle’s electrical system. Important: The blue cable must be connected to the 12/24V switched to enable the Car Kit to go into standby m...

2. Installation p Connecting Accessories The following illustration shows where to connect accessory devices. Item Description Caller ID The caller ID should be placed on the dash within view of the driver and passenger. (See Installing the Caller ID Display on page 9.) Microphone Ideally, the micro...

2. Installation q Preparing the Remote Control The remote control is designed to attach to the inside of the steering wheel on the left or right side. Installing the battery Before attaching the Remote control , install the supplied battery. 1. Remove the battery cover from the rear of the control m...

2. Installation r Installing the Caller ID Display The caller ID is designed to sit on the dashboard once it is attached to the stand. Remove the adhesive cover from the sticker pad (attached) from the base and press firmly to secure in place. If you wish to attach the LCD display elsewhere, such as...

2. Installation s Installing the Microphone Before installing the microphone, take note of the following: ƒ Make sure that the cable can reach from the microphone to the junction box. If the cable is too short, relocate the microphone. Do not lengthen the cable. ƒ The supplied microphone is uni-dire...

n How to Operate the Car Kit 3. Operation o Basic operation Connecting to the Mobile Phone for the First Time As soon as the ignition is turned on “BT380” text will be displayed on the backlit screen and it will quickly enter the “Pairing” mode searching for available Bluetooth mobile phones for pai...

3. Operation Nokia 6230i), it will upload call history, phone book entries, and also sort the phone book as soon as the phone is connected with the car kit. Note: Phonebook synchronization and sorting time may differ depending on size of phonebook list. This may affect the initial remote control res...

3. Operation As soon as you select Receive Contact the BT380 temporarily disconnects from your mobile phone to allow for the contact entry to be included into the BT380’s memory. Select the entry required and go to the send option to select send via Bluetooth. You can send multiple entries by repeat...

3. Operation have selected the telephone number, press the Answer button to call the telephone number you have just entered. Dial Number Settings 1 2 3 4 5 6 7 8 0286655757 Voice Tag Activation User can use phone’s voice command function via the BT380: Press the Reject/End button on remote control f...

3. Operation Settings → Bluetooth Setup → Paired Devices Note: To re-establish a connection with a previously paired device, the current pairing must be disabled first. To re-establish a link please go to the desired device name and press connecting to re-connect with the BT380: Settings → Bluetooth...

3. Operation You can disable or enable the BT380’s keytone: Settings → Sound Setting → Keytone Settings → Enable/Disable Keytone Settings Enable Exit 17

3. Operation You can also self-define the backlight color by using the following: Settings → Display Setting → Screen Color → User Defined User Define R G B Enabling Screen Auto Off You can enable or disable the backlight to go dim when the system idle time is longer than 10 seconds: Settings → Disp...

3. Operation v Other Settings Enabling and Disabling Automatic Phonebook Synchronization You can setup to automatically upload your phonebook when a connection is established: Settings → Phonebook Sync → Enable/ Disable Phonebook Sync Enable Exit Finding Out About the Device For information about th...

3. Operation w Factory Settings Reset BT380 allows you to master reset the car kit back to the original factory settings. To master reset BT380 please press both Answer and Reject buttons at the same time for few seconds until you hear a series of beeps which indicate that car kit has been reset bac...

3. Operation 1 2 MONT H L IMITED WARRANTY Applies to Je nsen Series Mobile Electronics. AUDIOVO X Electronics Corporation (the Compa ny) warrants to the original retail purchas e r of this product that should this produ ct or any p art ther eof, (other than trans mitters) under normal use and cond i...