JENSEN BT-390 - Manuals

3 2. Installation This section demonstrates how to set up and install the BT-390 into a vehicle. n Installing the Junction Box The Car Kit is designed to work with the 12/ 24-volt power supply of the vehicle. Refer to the following to install the junction box in a vehicle. 1. Locate a suitable place...

2. Installation o Connecting the Power Supply (For Options 1 and 2 only) The following illustration demonstrates how to connect the Car Kit’s power cables to the vehicle’s electrical system. Important: The blue cable must be connected to the 12/ 24V switched to enable the Car Kit to go into standby ...

2. Installation p Connecting Components The following illustration shows where to connect the components. 5 Item Description Caller ID The caller ID should be placed on the dash within view of the driver and passenger. (See Installing the Caller ID Display on page 9.) Microphone Ideally, the microph...

2. Installation q Preparing the remote control The control module is designed to attach to the inside of the steering wheel on the left or right side. Installing the battery Before attaching the control module, install the supplied battery. 1. Remove the battery cover from the rear of the control mo...

2. Installation r Installing the Caller ID Display The caller ID is designed to sit on the dashboard or other location. Once it is attached to the stand remove the adhesive cover from the sticker pad (attached) from the base and press firmly to secure in place. If you wish to attach the LCD display ...

2. Installation s Installing the Microphone Before installing the microphone, take note of the following: ƒ Make sure that the cable can reach from the microphone to the speaker. If the cable is too short, relocate the microphone. Do not lengthen the cable. ƒ The supplied microphone is uni-direction...

11 3. Operation n How to Operate the Car Kit Understanding the icons on your screen and remote control Please see below for the explanations of the icons on the main screen.

3. Operation o Basic operation Connecting to the Mobile Phone for the First Time As soon as the ignition is turned on “BT-390” text will be displayed on the backlit screen and it will quickly enter the “Pairing” mode searching for available Bluetooth mobile phones for pairing up. If the pairing scre...

3. Operation 15 Name & Numbers Sync Phone Book Receive Contact Back Note: Contacts are picked up in random order by the car kit; therefore, BT-390 will perform the sorting function in the background after the sync. If you access the phonebook before the sorting is completed, you may see that som...

3. Operation 16 screen will display the contact received. Repeat the process for other entries if necessary. Once you have finished, press the Reject/End button to stop OPP mode and re- establish the Bluetooth link with your mobile phone. Note: Some phones support sending multiple contacts in one op...

3. Operation 18 To initiate the private call function, simultaneously press both scroll buttons on the remote control during a call. Once activated, press the Answer button once to return to handsfree. Warning: It maybe illegal to use mobile phone while driving. Please check the law in your region. ...

3. Operation 19 Viewing, Connecting, and Deleting Previously Paired Phones You can re-establish a connection with a previously paired phone by entering the paired phone lists: Settings → Bluetooth Setup → Paired Phone Note: To re-establish a connection with a previously paired device, the connection...

3. Operation change to a different language simply follow the following steps: Settings → Language Setup → English Note: Available languages: English, Spanish, Portuguese, French, Italian, German, Dutch, Norwegian, Danish, Swedish (Region 1); English, Czech, Polish, Hungarian, Russian, Hebrew (Regio...

3. Operation R G B Enabling Auto Dim Screen You can enable or disable the backlight to go dim when the system idle time is longer than 10 seconds: Settings → Display Settings → Screen Auto Off → Enable/ Disable Screen Auto Off Enable Exit v Other Settings Setting up Automatic Phonebook Synchronizati...

3. Operation FM User 2 FM Disable To enable or disable handsfree function via FM transmitter: Settings → Sound Settings → H.F. Out F.M. → Enable/Disable HF OUT FM Enable Exit Using A2DP Media Player To enter Media Player interface: Settings → Sound Settings → Media Player 24

3. Operation Use the Media Menu buttons to Play, Pause, jump to Previous or Next songs, and Stop playing. Shortcut Key: Alternatively, press the Up scroll button in the idle screen to gain access to the media player instantly. Note: Phone must support A2DP to use this function. Not all phones are eq...

3. Operation Factory Settings Reset BT-390 allows you to master reset the car kit back to the original factory settings. To master reset BT-390 please press both Answer and Reject buttons at the same time for few seconds until you hear a series of beeps and then it will automatically enter the pairi...

3. Operation 1 2 MONT H L IMITED WARRANTY Applies to Je nsen Series Mobile Electronics. AUDIOVO X Electronics Corporation (the Compa ny) warrants to the original retail purchas e r of this product that should this produ ct or any p art ther eof, (othe r than transmitters) under normal use and condit...