JBL SCS200.7 - Manuals - manualsarea.com

Page 2 - Important Safety Precautions!; CAUTION; RISK OF ELECTRIC SHOCK

2 READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance withthe manuf...

Page 3 - JBL Consumer Products

3 INCLUDED THANK YOU FOR CHOOSING JBL For more than 50 years, JBLhas been involved in everyaspect of music and filmrecording and reproduction,from live performances tothe recordings you play inyour home, car or office. We’re confident that the JBLsystem you have chosen willprovide every note of enjo...

Page 4 - SPEAKER PLACEMENT; SUBWOOFER

4 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS † 1.5 – 1.8m 5 – 6 ft † FRONT SPEAKERS 0-0.6m 0-2 ft The front speakers should beplaced the same distancefrom each other as they arefrom the listening position.They should be placed atabout the same height fromthe floor as the listeners’ears will be, o...

Page 5 - MOUNTING OPTIONS; SATELLITES AND SURROUNDS; The

5 MOUNTING OPTIONS On shelves. On the wall. Wall brackets are included. On optional stands. SATELLITES AND SURROUNDS Prepare the speaker wire asdescribed on page 7. Threadthe two conductors throughthe two holes in the standbracket. Make sure to pre-serve the proper polarity (+ and – connections) byt...

Page 7 - CONNECTION TIPS; SPEAKER CONNECTIONS

7 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. The wires sup-plied with the system mayalready be stripped andtinned for easy insertion intothe speaker terminals. Youmay need to separate thetwo conductors further inorder to thread them throughthe shelf...

Page 9 - OUT IN

9 DOLBY PRO LOGIC (NON-DIGITAL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica-tions (not Dolby Digital, DTSor other digital processing),where the receiver/processordoes not have a subwooferoutput, or a volume-controlledpreamp (line-) level output: Connect your receiver ora...

Page 10 - OPERATION; Subwoofer; Subwoofer

10 OPERATION MIN MAX Subwoofer Level MIN MAX Subwoofer Level Move the Master Powerswitch (marked “Power” å ) to the “•” (On) position touse the SUB200 subwoofer. If you will be away fromhome for an extended periodof time, or if the subwooferwill not be used, switch theMaster Power switch å to the Of...

Page 11 - is; TROUBLESHOOTING

If there is no sound from anyof the speakers: • Check that receiver/ampli-fier is on and a source isplaying.• Check that the powered subwoofer is plugged in, and its Power switch å is switched on (“•” position).• Check all wires and con-nections between receiver/amplifier and speakers.Make sure all ...

Page 12 - Satellites; Center; Ohms; SPECIFICATIONS; OWNER’S GUIDE

12 SCS200.7 System Frequency Response 35Hz – 20kHz (–6dB) Satellites Maximum Recommended Amplifier Power 100 Watts Nominal Impedance 8 Ohms Sensitivity 86dB @ 1 Watt/1 meter Frequency Response 110Hz – 20kHz (–6dB) Tweeter One 1/2" (13mm) titanium-laminate dome,video-shielded Midrange One 3" ...