JBL SCS200.5/230 - Manuals - manualsarea.com

Page 2 - Important Safety Precautions!

2 READ FIRST! Important Safety Precautions! 1. Unpacking: Check the product carefully. If it has been damaged intransit, report the damage immedi-ately by calling your dealer and/or theshipping company that delivered it. 2. Connections: Whenever changing, connecting or disconnecting signal orpower c...

Page 4 - JBL Consumer Products

4 INCLUDED THANK YOU FOR CHOOSING JBL For more than 50 years, JBLhas been involved in everyaspect of music and filmrecording and reproduction,from live performances tothe recordings you play inyour home, car or office. We’re confident that the JBLsystem you have chosen willprovide every note of enjo...

Page 5 - SPEAKER PLACEMENT; SUBWOOFER

5 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS † 1.5 – 1.8m 5 – 6 ft † FRONT SPEAKERS 0-0.6m 0-2 ft The front speakers should beplaced the same distancefrom each other as they arefrom the listening position.They should be placed atabout the same height fromthe floor as the listeners’ears will be, o...

Page 6 - MOUNTING OPTIONS; SATELLITES AND SURROUNDS

6 MOUNTING OPTIONS On shelves. On the wall. Wall brackets are included. On optional stands. SATELLITES AND SURROUNDS Prepare the speaker wire asdescribed on page 8. Threadthe two conductors throughthe two holes in the standbracket. Make sure to pre-serve the proper polarity (+ and – connections) byt...

Page 8 - CONNECTION TIPS; SPEAKER CONNECTIONS

CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the endsof the speaker wire asshown. The wires suppliedwith the system may alreadybe stripped and tinned foreasy insertion into thespeaker terminals. You mayneed to separate the twoconductors further in orderto thread them through theshelf stand...

Page 10 - OUT IN; Surround back speaker is used only in SCS200.6 system.

10 DOLBY PRO LOGIC (NON-DIGITAL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica-tions (not Dolby Digital, DTSor other digital processing),where the receiver/proces-sor does not have a sub-woofer output, or a volume-controlled preamp (line-)level output: Connect your receive...

Page 11 - OPERATION; Subwoofer; Subwoofer

11 OPERATION MIN MAX Subwoofer Level MIN MAX Subwoofer Level Move the Master Powerswitch (marked “Power” å ) to the “•” (On) position to usethe SUB200 subwoofer. If you will be away fromhome for an extended periodof time, or if the subwooferwill not be used, switch theMaster Power switch å to the Of...

Page 12 - TROUBLESHOOTING

12 If there is no sound from anyof the speakers: • Check that receiver/ampli- fier is on and a source isplaying. • Check that the powered subwoofer is plugged in, and its Power switch å is switched on (“•” position). • Check all wires and con- nections between receiver/amplifier and speakers.Make su...

Page 14 - SATELLITES; CENTER; Ohms; Bass reflex; SPECIFICATIONS; OWNER’S GUIDE

14 SCS200.5/230 ANDSCS200.6/230 SYSTEMS Frequency Response 35Hz – 20kHz (–6dB) SATELLITES Maximum Recommended Amplifier Power 100 Watts Power Handling (Continuous/Peak) 50W/160W Nominal Impedance 8 Ohms Sensitivity 86dB @ 1 Watt/1 meter Frequency Response 110Hz – 20kHz (–6dB) Tweeter One 13mm (1/2&#...