JBL SCS150SI - Manuals - manualsarea.com

Page 2 - Frequency Response 30Hz – 20kHz (–6dB); Center

- CONTENTS - BASIC SPECIFICATIONS……………….……….……………….1 DETAILED SPECIFICATIONS ……..………………..…………..2 CONNECTIONS…………… …..……………...…………..……...3 OPERATION………………………………………………………. 6 BASIC TROUBLESHOOTING……..……….…………………….7 EXPLODED VIEW……..……….………………………………….8 TEST SET-UP AND PROCEDURE……..……….………..……..9 PCB DRA...

Page 3 - 50W Powered Sub/ Plate Amp

150W Powered Sub/ Plate Amp LINE VOLTAGE Yes/No Hi/Lo Line Unit Notes US 120vac/60Hz Yes 108-132 Vrms Normal Operation Asia 100vac/50Hz Yes 90-110 Vrms Normal Operation Parameter Specification Unit QA Test Limits Conditions Notes Amp Section Type (Class AB, D, other) D D n/a Load Impedance (speaker)...

Page 4 - S P E A K E R C O N N E C T I O N S; Connection Tips

S P E A K E R C O N N E C T I O N S Connection Tips To use the binding-postspeaker terminals on thesubwoofer, unscrew thecolored collar until the passthrough hole in the centerpost is visible under thecollar. Insert the bare end ofthe wire through this hole;then screw the collar downuntil the connec...

Page 5 - or other digital; Subwoofer; HIGH LEVEL; L R; OUT

Dolby * Pro Logic * (Non-Digital) – Speaker Level Use this installation methodfor Dolby Pro Logic appli-cations (not Dolby Digital,DTS ® or other digital processing), where thereceiver/processor does nothave a subwoofer output, or a volume-controlled preamp(line-) level output: Connect your receiver...

Page 6 - Dolby Digital or DTS (or Other Digital Surround Mode) Connection

Dolby Pro Logic (Non-Digital) – Line Level Use this installation methodfor Dolby Pro Logic appli-cations (not Dolby Digital, DTSor other digital processing),where the receiver/processoris equipped with a subwooferoutput, or a volume-controlledpreamp (line-) level output: Use RCA-type patch cords to ...

Page 7 - O P E R A T I O N; to the “; Volume

O P E R A T I O N MIN MAX Subwoofer Level MIN MAX Subwoofer Level Move the Master Powerswitch (marked “Power” ¡ ) to the “ • ” (On) position to use the subwoofer. The subwoofer will automaticallyturn itself on or go intostandby (sleep) mode whenleft in the standby mode(“Auto/On” switch ™ in the “Aut...

Page 8 - T R O U B L E S H O O T I N G

If there is no sound from anyof the speakers: • Check that receiver/amplifieris on and a source is playing.• Check that the powered subwoofer is plugged in, andits Power switch ¡ is switched on to the “ • ” position.• Check all wires and con-nections between receiver/amplifier and speakers. Makesure...

Page 10 - Test Set Up and Procedure; Sweep Function

Test Set Up and Procedure Equipment needed: • Function/signal generator/sweep generator • Integrated Amplifier • Multimeter • Speaker cables General Unit Function (UUT = Unit Under Test) 1) From the signal generator, connect one line level (RCA) cable to the Subwoofer Line Level Input jacks L/R on t...

Page 17 - Mechanical/Satellite Parts List; SUBWOOFER; OPTIONAL: Floor Stands for 150SAT & 160SAT satellites – FS400

SCS150SI/SCS160SI/SCS180.6S Mechanical/Satellite Parts List Description SCS150SI SCS160SI SCS180.6S SUBWOOFER Amplifier Ass’y Not for Sale Not for Sale Not for Sale SUB 150/SUB160/SUB180 Cabinet Not for Sale Not for Sale Not for Sale 10” Woofer DCR = 3.4 ohms ±10% 25MF12DZB-DW02 25MF12DZB-DW02 25MF1...

Page 18 - Semiconductors

SUB150/SUB160/SUB180 Electrical parts List Part# Reference Designator Description Qty Input/Power Amp PCB Semiconductors 197131n4148 D102,103,104,105,143,201-208, 211,212,214,215,216,301,302 Diode 1N4148 20 19915000335 D213 Zener 3.3V 1/2W 52mm TAP 1 19915000625 D101 Zener 6.2V 1/2W 52mm TAP 1 19915...

Page 19 - Capacitors

Part# Reference Designator Description Qty Input/Power Amp PCB 11016221j26 R144 RES, 220 ohms 1/6W ±5% CF 1 11016222j26 R102 RES, 2.2K 1/6W ±5% CF 1 11016223j26 R238,247,255,256,263,316 RES, 22K 1/6W ±5% CF 6 11016273j26 R223,237 RES, 27K 1/6W ±5% CF 2 11016333j26 R310 RES, 33K 1/6W ±5% CF 1 1101639...

Page 20 - Resistors

Part# Reference Designator Description Qty Input/Power Amp PCB 1353105m50 C228 CAP, E 1U 50V ±20% TAP 1 1353106m50 C201,202,206,213,219,231,241,243, 251,253,319,321 CAP, E 10U 50V ±20% TAP 12 1353107m10 C114,115 CAP, E 100U 10V ±20% TAP 2 1353107m16 C234 CAP, E 100uF 16V ±20% TAP 1 1353107m35 C507,5...

Page 22 - TO SPK WIRE

Part# Reference Designator Description Qty Misc./Mechanical 723a125 EVA (Gasket) 213*15*2.0mm 2 723a125-1 EVA (Gasket) 213*15*1.0t 2 723b125 EVA (Gasket) 238*15*2.0mm 2 723b125-1 EVA (Gasket) 238*15*1.0t 2 723j125 TO SPK WIRE EVA (Gasket) 225*15*1t UL 1 06-t30804 R/P TO H/S-2,R/P TO PCB-2 SCREW 3*8 ...

Page 23 - Integrated Circuit Diagrams

Integrated Circuit Diagrams C B E TIP31C NPN, TIP32C PNP, Q501,502 4558 / TLO72 DUAL OP AMP, U203, IC1 OPAMP, QUAD 14P DIL TL074 U201, 202, 301 TRANS, PNP, 2N5401 TAP,TO-92, Q503 TRANS, PNP, TAP,2SA1015GR, 2SC1037K, 2SA1514K Q3,6,7,9,101,107,112 TRANS, NPN, 2N5551 TAP, Q114,115 TRANS, NPN, 2SC1815GR...

Page 24 - SCHEMATICS

Page 27 - Packaging

SATELLITE STYROFOAMSCS160SI/SCS180.6S – 431-000-00937 WIRE SET (SURROUND)SCS150SI – SAL5009SCS160SI/SCS180.6S – 370-000-00081 OWNER’S MANUALSCS150SI – AI5139SCS160SI – 406-000-00890SCS180.6S – 406-000-05102 WARRANTY CARDSCS150SI – AT5160SCS160SI/SCS180.6S – 405-000-00258 WALL BRACKETSCS150SI – WI040...