JBL SCS136 - Manuals - manualsarea.com

Page 2 - Important Safety Precautions!; CAUTION; RISK OF ELECTRIC SHOCK

2 READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation open- ings. Install in accordance with theman...

Page 3 - JBL Consumer Products

3 INCLUDED THANK YOU FOR CHOOSING JBL For more than 50 years, JBLhas been involved in everyaspect of music and filmrecording and reproduction,from live performances tothe recordings you play inyour home, car or office. We’re confident that the JBLsystem you have chosen will provide every note of enj...

Page 4 - SPEAKER PLACEMENT; SUBWOOFER

4 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS 5 – 6 ft. FRONT SPEAKERS 0-2 ft. The front speakers should beplaced the same distancefrom each other as they arefrom the listening position.They should be placed atabout the same height fromthe floor as the listeners’ears will be, or they may beangled ...

Page 5 - MOUNTING OPTIONS; Slide speaker onto support.

5 MOUNTING OPTIONS On shelves. WALL-MOUNTING On the wall. Wall brackets are included. Slide speaker onto support. On optional stands (FS300). Place speaker and support on wall plate. Attach plate to wall. Thebrackets should be placed, ifpossible, so that the screwswill fasten into a wooden wallstud....

Page 6 - CONNECTION TIPS; SPEAKER CONNECTIONS

6 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends ofthe speaker wire as shown.Speakers and electronics terminals have corresponding(+) and (–) terminals. Mostmanufacturers of speakersand electronics, includingJBL, use red to denote the (+) terminal and black for the(–) terminal. The ...

Page 7 - HIGH LEVEL; L R; OUT

7 DOLBY* PRO LOGIC* (NON-DIGITAL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica-tions (not Dolby Digital, DTS ® or other digital processing),where the receiver/processordoes not have a subwooferoutput, or a volume-controlledpreamp (line-) level output: Connect your receive...

Page 9 - OPERATION; Subwoofer; Subwoofer; to the “; VOLUME

9 OPERATION MIN MAX Subwoofer Level MIN MAX Subwoofer Level Move the Master Powerswitch (marked “Power” ¡ ) to the “ • ” (On) position to use the subwoofer. The SCS136subwoofer will automaticallyturn on or go into standby(sleep) mode when left in theauto mode (“Auto/On” switch ™ in the “Auto” positi...

Page 10 - is; TROUBLESHOOTING

10 If there is no sound from anyof the speakers: • Check that receiver/ampli-fier is on and a source isplaying. • Check that the powered subwoofer is plugged in, andthat its Power switch ¡ is switched on (“•” position).• Check all wires and con-nections between receiver/amplifier and speakers.Make s...

Page 11 - Staple sales invoice here.

11 If there is no sound from the surround speakers: • Check all wires and con-nections between receiver/amplifier and speakers.Make sure all wires are con-nected. Make sure none ofthe speaker wires are frayed,cut or punctured, or touchingeach other. • Review proper operation ofyour receiver/amplifie...

Page 12 - SPECIFICATIONS; OWNER’S GUIDE; Satellites; Center; Ohms nominal

12 SPECIFICATIONS All features and specifications are subject to change without notice. *Trademarks of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc. D E S I G N G O A L : Bring the thrill of live performance and movie sound to the home environment by calling on J...