JBL SAM2LF - Manuals - manualsarea.com

Page 2 - SAM2LF C; ONTENTS

I NTRODUCTION ......................................................................................................................................................3 I NCLUDED ...............................................................................................................................

Page 3 - THX U; NTRODUCTION

Thank you for purchasing this JBL Synthesis ® Array ™ Module home theater speaker. This product represents the synthesis of everything that JBL has learned about the emotional power of audio and video in sixty years of preemi-nence in the field. It sets new benchmarks in the use of “high technology”...

Page 4 - VIEWING; FLOOR PLAN; PEAKER

Positioning your loudspeakers properly is critical in order to achieve the sonic performance of a home theater. Please read the following section for guidance in correct and optimal placement. L EFT AND R IGHT S PEAKERS : If you have purchased a Synthesis Array Module digital home theater system, th...

Page 7 - SAM1HF; AND; ONFIGURATION AND

7 The different configurations of speaker arrays are accomplished by combining one (1) SAM1HF module with at leastone (1) and up to four (4) SAM2LF modules. The configuration of your system depends greatly on room size and atwhat SPL the system will be used. The different array configurations can be...

Page 8 - Detailed Configurations and System Connection; Configuration 1: One SAM1HF and one SAM2LF vertical

8 IMPORTANT NOTE: Do not place the SAM1HF on its side. It must be mounted with the UHF DRIVER on thetop, as shown below. Failure to do this will have a negative impact on the performance of this speaker. Detailed Configurations and System Connection Configuration 1: One SAM1HF and one SAM2LF vertica...

Page 10 - ONNECTING THE

To connect the Synthesis Array loudspeakers to the power amplifiers or receiver, use two-conductor insulated speakerwire. We recommend #14 AWG wire as a minimum size. Your JBL dealer can recommend suitable cables. Both theSAM1HF and SAM2LF utilize push-style friction binding posts that can accommoda...

Page 14 - JBL S; YNTHESIS

14 C ONNECTION TO THE R EST OF THE JBL S YNTHESIS S YSTEM S800 10A 120V 50/60Hz 1200W ON OFF MANUAL ON AUTO ON IN OUT Ch. 2 Output Ch. 1 BRIDGED Input Ch. 2 Input ATTENTION: VOIR LE CAHIER D' INSTRUCTION WARNING: HAZARDOUS ENERGY, MAKE PROPER SPEAKER CONNECTIONS; SEE OWNERS MANUAL BEFORE USING. seri...

Page 15 - No sound coming; ROUBLESHOOTING

S YMPTOM P ROBABLE C AUSE S OLUTION No sound coming • Amplifier not turned on • Turn on amplifier. from speaker • Amplifier gain is low • Make sure that there is amplifier gain for that channel. • Correct source not • Select proper source. selected or turned on • Defective patch cords to amplifier •...

Page 16 - PECIFICATIONS; SACD is a trademark of Sony Corporation.

Harman Consumer Group, Inc.250 Crossways Park Drive, Woodbury, NY 11797 8500 Balboa Boulevard, Northridge, CA 91329818.830.8757 www.jblsynthesis.com Part No. 361697-001 4/07 Declaration of Conformity We, Harman Consumer Group, Inc. 2, route de Tours 72500 Château du LoirFrance declare in own respons...