JBL MPC-X100 100 Hz - Manuals

2 II. Installation CAUTION: The MPC-X100 contains active components which can be damaged by electro- static discharge (ESD). Be sure to practice standard ESD precautions, and always ground yourself and your workstation before handling exposed circuit cards.Installing the MPC-X100 requires PC board s...

3 NOISE SHIELD TAB 8 If you need to make any adjustments to the MPC-X100 settings or if you need to record them, do so now, because the MPC-X100 will be inaccessible once the noise shield is installed and the input panel is re-installed into the amplifier chassis. See Section III, “Programming the M...

4 Bridged Mode Operation —With the amplifier in bridged mono mode and driving a high- power subwoofer system, the MPC-X100 can be used as a subwoofer filter, taking full-range audio from Channel 1’s input and sending on a 100 Hz low-pass signal to the amplifier circuitry. For correct operation, bypa...