Page 2 - IMPORTANT SAFETY INSTRUCTIONS; Verify Line Voltage Before Use
2 2 IMPORTANT SAFETY INSTRUCTIONS Verify Line Voltage Before Use The JBL Authentics speaker has been designed for use with 100-240 volt, 50/60 Hz AC current. Connection to a line voltage other than that for which your product is intended can create a safety and fire hazard and may damage the unit. I...
Page 3 - TABLE OF CONTENTS
www.jbl.com English 3 3 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 2 1. INTRODUCTION 4 1.1 JBL One app 4 1.2 Voice control 4 2. WHAT’S IN THE BOX 5 3. PRODUCT OVERVIEW 5 3.1 Front panel & Top panel 5 3.2 Back panel 6 4. POWER ON 7 4.1 Connect to power 7 4.2 Auto standby 7 4.3 Auto wakeup 7 ...
Page 4 - JBL One; Connect to your home network; ASSISTANTS
4 4 1. INTRODUCTION Thank you for purchasing the JBL Authentics speaker. We encourage you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions for setting up and getting started. To make the most of product features and support, you ma...
Page 5 - WHAT’S IN THE BOX; Speaker; Product information; ) Voice assistant status LED
www.jbl.com English 5 5 2. WHAT’S IN THE BOX Unpack the box carefully and ensure that the following parts are included. If any part is damaged or missing, do not use it and contact your retailer or customer service representative. Speaker Power cord* * * Power cord quantity and plug type vary by reg...
Page 6 - For voice control and automatic self-tuning.
6 6 6) Status indicator System: Regular pulsing (white) System startup Fast pulsing (white) Software updating in progress Solid (amber) Restoring factory settings Network connection: Slow pulsing (white) Entering Wi-Fi setup mode, or network disconnected Solid (green) Speaker discovered by the JBL O...
Page 7 - Connect to power; Play over your home network
www.jbl.com English 7 7 4. POWER ON 4.1 Connect to power • Connect the speaker to power by using the supplied power cord. → The speaker switches on and enters Wi-Fi setup mode automatically. 4.2 Auto standby If the speaker is inactive for more than 10 minutes, it will switch to standby mode automati...
Page 8 - Wired connection with your home network; app for music streaming and control.; Connect to your Bluetooth device; To reconnect the last paired device; speaker goes to standby mode. Next time you switch to the; To connect to another Bluetooth device; In the Bluetooth source, press; Connect to an external audio device
8 8 NOTES: – Make sure that your speaker is connected to the same Wi-Fi network as your Android or iOS device. – If your speaker is not discovered by the JBL One app, hold and together for more than 10 seconds to re-enter the Wi-Fi setup mode. – To enable Chromecast built-in, Alexa Multi-Room Music,...
Page 9 - Set up your voice assistants; Connect to your home network; Talk to your voice assistants
www.jbl.com English 9 9 6. VOICE ASSISTANTS 6.1 Set up your voice assistants With the JBL One app on your Android or iOS devices, set up Google Assistant, Alexa, or both. • Follow the prompts to set up voice assistants in the JBL One app immediately after connecting the speaker to your home network ...
Page 10 - Play over your home network; Access your presets with the (Moment) button; To exit from the music playback, switch to other sources.
10 10 7. PLAY NOTES: – To enable Chromecast built-in, Alexa Multi-Room Music, and Alexa Cast, please register Google Assistant and Amazon Alexa on the Google Home app and Amazon Alexa app respectively. – The speaker can support audio streaming, but not video streaming. – During music streaming throu...
Page 11 - To enter the Control Center on an iOS device, swipe; and select the grouped speakers.
www.jbl.com English 11 11 7.1.3 Play through AirPlay Through AirPlay, stream audio on your iOS device to the speaker. 1. On your iOS device, • To enter the Control Center on an iOS device, swipe down from the upper right corner. Tap to select the connected speaker, then start audio streaming from an...
Page 12 - Play from the Bluetooth source; Connect to your Bluetooth device; Control music playback; Play from the AUX source; Connect to an external audio
12 12 Alexa MRM: Multi-room music 1. Check that you have enabled Amazon Alexa on the speaker through the JBL One app. 2. Through the Amazon Alexa app, create a Multi-room Music group for the speaker. Refer to the Amazon Alexa app for more information. Devices Devices DEVICES Combine speakers Amazon ...
Page 13 - With the JBL One app or the knobs on the speaker, you can; Software upgrade; updated to the latest version.; Restore factory settings; On the speaker, hold and
www.jbl.com English 13 13 8. SETTINGS 8.1 Sound settings 8.1.1 Tone controls With the JBL One app or the knobs on the speaker, you can adjust the Equalizer (EQ) settings to customize the sound. • Option 1: On the speaker: Default EQ setting EQ Default level LED ring TREBLE 6 BASS • Option 2: Through...
Page 14 - PRODUCT SPECIFICATIONS; Model: Authentics 200
14 14 9. PRODUCT SPECIFICATIONS Authentics 200 General specification • Model: Authentics 200 • Sound system: Stereo 2.0 • Power supply: 100 - 240V AC, ~ 50/60Hz • Total speaker power output (Max @THD 1%): 90W • Transducer: 2 x 25mm tweeter + 5" woofer • Networked standby power: < 2.0 W • Oper...
Page 15 - System; to another Bluetooth device; Voice assistants; Playback; AirPlay cannot find the speaker as an AirPlay speaker for
www.jbl.com English 15 15 10. TROUBLESHOOTING Never try to repair the product yourself. If you have problems using this product, check the following points before you request services. For more troubleshooting tips, visit the support page at https://product.jbl.com/AUTHENTICS-200.html or https://pro...
Page 16 - Hey Google; Google Assistant is not available in certain languages and
16 16 Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses . Dolby, Dolby Atmos, and the double-D symbol are registered trad...
Page 17 - OPEN SOURCE LICENSE NOTICE; Please feel free to contact us at:
www.jbl.com English 17 17 12. OPEN SOURCE LICENSE NOTICE This product contains open source software licensed under GPL. For your convenience, the source code and relevant build instruction are also available at https://harman-webpages. s3.amazonaws.com/Harman_One_OS_A_package_license_list.htm . Plea...
