Page 2 - Important Safety Precautions!; CAUTION; RISK OF ELECTRIC SHOCK
2 READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordancewith the manuf...
Page 3 - SPEAKER PLACEMENT; • As a general rule, bass; SPEAKER CONNECTION; JBL Consumer Products
SPEAKER PLACEMENT • As a general rule, bass response increases as asubwoofer is placed closerto a wall. Therefore, bassoutput is maximized whenthe subwoofer is placed in acorner. • It is also recommended that the subwoofer be positionedalong the same wall as thefront loudspeakers. Low-frequency soun...
Page 4 - Analog Receiver/Processor – Speaker-Level Connections; Use this installation method; Subwoofer; Receiver
4 Analog Receiver/Processor – Speaker-Level Connections Use this installation method only with an analog receiver/ processor that does not havedigital processing or bassmanagement, and also doesnot have a subwoofer outputor a volume-controlled preamp(line-) level output: Connect the speaker wires fo...
Page 5 - Digital Receiver/Processor – LFE Connection; or other; Analog Receiver/Processor – Line-Level Connections
Digital Receiver/Processor – LFE Connection Use this installation methodfor Dolby Digital, DTS ® or other digital surround processorsthat have bass-managementprogramming, or for analogreceivers/processors thathave a filtered subwoofer output: IMPORTANT: Make sure thatthe LFE toggle switch on thesubw...
Page 6 - OPERATION; Crossover Adjustments; Northridge E Series
OPERATION When the unit is plugged inand the power switch is onand no signal is received, theLED on the top of the unit willturn red. When a signal ispresent, the LED will turngreen. Note: It will take several min-utes for the LED to turn fromgreen to red after the inputsignal to the subwoofer isrem...
Page 7 - TROUBLESHOOTING; • Adjust the crossover point.; Phase Control
TROUBLESHOOTING If you used the high-level(speaker) inputs and there is no sound from any of thespeakers: • Check that the receiver/amplifier is on and a source is playing. • Check that the powered subwoofer is plugged into an active electrical outlet and is switched on. • Check all wires and connec...
Page 8 - SPECIFICATIONS; PRO SOUND COMES HOME; Amplifier; and Speaker Level with; Frequency; crossover setting; Dimensions
SPECIFICATIONS © 2003 Harman International Industries, Incorporated JBL is a registered trademark of Harman International Industries, Incorporated. Part No. 350883-001 PRO SOUND COMES HOME ™ JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 8500 Balboa Boulevard, Northridge, CA 913...