JBL CVCEN50 - Manuals - manualsarea.com

Page 2 - Important Safety Precautions!; CAUTION

2 READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance withthe manuf...

Page 3 - JBL Consumer Products

3 INCLUDED THANK YOU FOR CHOOSING JBL For more than 50 years, JBLhas been involved in everyaspect of music and filmrecording and reproduction,from live performances tothe recordings you play inyour home, car or office. We’re confident that the JBLsystem you have chosen will provide every note of enj...

Page 4 - SPEAKER PLACEMENT; SUBWOOFER

4 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS † 5 – 6 ft 1.5 – 1.8m † FRONT SPEAKERS (0-2 ft) 0-0.6m The front speakers should beplaced the same distancefrom each other as they arefrom the listening position.They should be placed atabout the same height fromthe floor as the listeners’ears will be,...

Page 5 - MOUNTING OPTIONS; SATELLITES AND SURROUNDS

5 MOUNTING OPTIONS On shelves using the optionalCVTS50 table stands. On the wall. Wall brackets areincluded. On compatible floor stands avail-able from other manufacturers,using the supplied floor standadaptors. SATELLITES AND SURROUNDS Important Safety Notes: • The table stand consists oftwo main p...

Page 7 - Important Safety Note:; ATTACHING THE CRADLE TO THE CENTER SPEAKER; do not

7 Important Safety Note: The customer is solelyresponsible for proper selec-tion of mounting hardwarenot included with the speak-ers, and for proper assemblyand installation of the wallbrackets, including but notlimited to the selection ofappropriate weight-bearingsupports and proper use ofthe brack...

Page 8 - CONNECTION TIPS; SPEAKER CONNECTIONS

8 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. The wires sup-plied with the system mayalready be stripped andtinned for easy insertion intothe speaker terminals. Youmay need to separate thetwo conductors further inorder to thread them throughthe shelf...

Page 10 - SUBWOOFER OPERATION; to

10 SUBWOOFER OPERATION Press the Master Powerswitch (marked “Power” å ) in to the On position to usethe subwoofer. The CVSUB50subwoofer will automaticallyturn on or go into standby(sleep) mode as describedbelow. When your receiveror amplifier is off, or is notsending program material tothe subwoofer...

Page 11 - to the opposite position,; TROUBLESHOOTING

If there is no sound from anyof the speakers: • Check that receiver/ampli-fier is on and a source isplaying.• Check that the powered subwoofer is plugged in, and is turned on (Powerswitch å pushed in). • Check all wires and con-nections between receiver/amplifier and speakers.Make sure all wires are...

Page 12 - System; crossover setting at signal source; SPECIFICATIONS; OWNER’S GUIDE; J B L C I N E M A V I S I O N

12 System Frequency Response 22Hz – 20kHz (–6dB) CVSAT50 Maximum Recommended Amplifier Power 150 Watts** Power Handling 50W Continuous/300W Peak Frequency Response 55Hz – 30kHz (–6dB) Nominal Impedance 8 Ohms Sensitivity 90dB @ 1 Watt/1 meter Tweeter One 3/4" (19mm) titanium-laminate dome,video-...