JBL CSB6 - Manuals - manualsarea.com

Page 2 - IMpORtANt SAfEty INStRUCtIONS; Do not use this apparatus near water.; CAUTION

2 IMpORtANt SAfEty INStRUCtIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s ins...

Page 3 - tABLE Of CONtENtS; Thank You For Choosing This JBL

3 www.jbl.com E ngli sh tABLE Of CONtENtS Thank You For Choosing This JBL ® Product ......................................................................... 4 Included Items ..................................................................................................................... 4 Speak...

Page 4 - EACH MODEL SOLD SEPARATELY

4 thANk yOU fOR ChOOSINg thIS JBL ® pRODUCt For more than 60 years, JBL ® products have been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the JBL system you have chosen will ...

Page 5 - SpEAkER pLACEMENt; FRONT SPEAKERS

5 www.jbl.com E ngli sh SpEAkER pLACEMENt FRONT SPEAKERS CENTER-CHANNEL SPEAKER SUBWOOFER 0 – 2 ft 0 – 0.6m SURROUND SPEAKERS Alternate placement for surround speakers when only 5.1 channels are used; required placement for surround back speakers in 7.1-channel systems. † Single surround back speake...

Page 6 - WALL-MOUNtINg thE CSC56 AND CSB6; stores) to ensure the proper and safe wall-mounting of the speakers.

6 WALL-MOUNtINg thE CSC56 AND CSB6 The CSC56 center channel and the CSB6 are designed to be mounted on the wall. There are two (2) fixed-mount wall brackets provided for the CSC56, and one for the CSB6. Each speaker bracket will require up to three 1-1/2" #10 wood screws; each screw should be fa...

Page 7 - SpEAkER CONNECtIONS; CONNECTION TIPS; weak bass and a poor stereo image.

7 www.jbl.com E ngli sh SpEAkER CONNECtIONS CONNECTION TIPS Separate and strip the ends of the speaker wire as shown. Speakers and other electronic components have corresponding (+) and (–) terminals. Most manufacturers of speakers and electronics, including JBL electronics, use red to denote the (+...

Page 8 - DOLBy; your receiver or amplifier.; DOLBY PRO LOGIC; Use this installation method for Dolby Pro Logic

8 SpEAkER CONNECtIONS DOLBy ® DIgItAL OR DtS ® (OR OthER DIgItAL SURROUND MODE) CONNECtION Use this installation method for Dolby Digital, DTS or other digital surround processors: LINE LEVEL IN LFE L R LFE OUT RECEIVER SUBWOOFER Use the line-level input jack marked “LFE” for the Low-Frequency Effec...

Page 9 - SUBWOOfER OpERAtION; VOLUME; PHASE

9 www.jbl.com E ngli sh SUBWOOfER OpERAtION Press the Master Power switch (marked “Power” å ) to the On position to use the subwoofer. The CSS11 subwoofer will automatically turn on or go into Standby (sleep) mode as described below. When your receiver or amplifier is off, or is not sending program ...

Page 10 - tROUBLEShOOtINg

10 pROBLEM SOLUtION If there is no sound from any of the speakers: Check that receiver/amplifier is on and a source is playing. • Check that the powered subwoofer is plugged in and is turned on (Power • switch å pushed in). Check all wires and connections between receiver/amplifier and speakers. • M...

Page 11 - SpECIfICAtIONS; SYSTEM

11 www.jbl.com E ngli sh SpECIfICAtIONS SYSTEM Frequency response: 27Hz – 30kHz (–6dB) CST56 CSB6 CSC56 Maximum recommended amplifier power: 150W* 125W* 150W* Power handling: 50W continuous/300W peak 40W continuous/300W peak 50W continuous/300W peak Frequency response: 55Hz – 30kHz (–6dB) 60Hz – 30k...