JBL CS1500 - Manuals

6 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. Speakers and electronicsterminals have corresponding(+) and (–) terminals. Mostmanufacturers of speakersand electronics, includingJBL, use red to denote the (+)terminal and black to denotethe (–) terminal...

7 DOLBY PRO LOGIC ® (NON-DIGITAL) – LINE LEVEL Use this installation methodfor Dolby Pro Logicapplications (not Dolby Digital,DTS or other digitalprocessing), where thereceiver/processor isequipped with a subwooferoutput, or a volumecontrolledpreamp (line-) level output: Use RCA-type interconnectsto...

8 SUBWOOFER OPERATION Press the Master Powerswitch (marked “Power” a ) to the On position to use thesubwoofer. The CSS10subwoofer will automaticallyturn on or go into standby(sleep) mode as describedbelow. When your receiver oramplifier is off, or is notsending program material to the subwoofer, the...

9 If there is no sound from anyof the speakers: • Check that receiver/amplifieris on and a source is playing. • Check that the powered subwoofer is plugged in and isturned on (Power switch a pushed in). • Check all wires andconnections between receiver/amplifier and speakers. Makesure all wires are ...

SYSTEM Frequency Response 27Hz – 30kHz (–6dB) CST55 Maximum Recommended Amplifier Power 150 Watts* Power Handling 50W Continuous/300W Peak Frequency Response 55Hz – 30kHz (–6dB) Nominal Impedance 8 Ohms Sensitivity 90dB @ 1 Watt/1 meter Tweeter One 3/4" (19mm) titanium-laminate dome, video-shiel...