JBL BP150.1 - Manuals

• Before drilling or cutting holes, use a utility knife to remove unwanted fabricor vinyl to keep material from snaggingin a drill bit. • When routing cables, keep input-signal cables away from power cables andspeaker wires. • When making connections, make certain they are secure and properlyinsulat...

4 FREQUENCY INDUCTOR CAPACITOR Crossover 6dB/oct. LP 6dB/oct. HP (4-ohm) (4-ohm) 75Hz 8.0mH 530µF 100Hz 6.4mH 400µF 125Hz 5.0mH 318µF 150Hz 4.2mH 265µF 175Hz 3.6mH 227µF 200Hz 3.2mH 198µF Wiring the Power Connections Refer to Figures 1–3 for connector loca-tions. All the Power Series amplifierswill ...

6 Troubleshooting Symptom Likely Cause Solution No Audio Short circuit in speaker or speaker wire. Disconnect speaker leads one at a time to determine (Red LED flashes every four seconds) which speaker or wire is shorted or defective.Repair the short circuit or replace bad speaker. No Audio No volta...