JBL 2.4G - Manuals - manualsarea.com

Page 2 - which the receiver is connected.; FCC Radiation Exposure Statement

2 Declaration of Conformity We, Harman Consumer Group International 2, route de Tours 72500 Château du Loir France declare in own responsibility that the product described in this owner’s manual is in compliance with technical standards: EN 61000-6-3:2001 EN 61000-6-1:2001 Laurent Rault Harman Consu...

Page 3 - Important Safety Precautions!

READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.Install in accordance with the manufac...

Page 4 - Included; RIGHT-CHANNEL SPEAKER; CODE

4 THANK YOU FOR CHOOSING JBL ® For more than 60 years, JBL has been involved in every aspect of music andfilm recording and reproduction, from live performances to the recordings youplay in your home, car or office. We’re confident that the JBL system you have chosen will provide every noteof enjoym...

Page 5 - RL; Surround Channel; CONNECTIONS

5 NOTES: For the sake of simplicity, throughout this manual we have used the term “source” when describing connections and operation. This would applyto any device such as an A/V receiver, audio component, computer or portablemusic player. The JBL On Air Control 2.4G is designed for use in most coun...

Page 6 - SOURCE; Application 2

6 Some computer sound cards feature preamp outputs in addition to or instead of speaker outputs. If your computer does feature preamp outputs, we recommend that they be used instead of speaker outputs. If you would like toconnect the computer to the JBL On Air Control 2.4G using preamp outputs onyou...

Page 7 - Connection Option B

7 When connected properly, the top LED on the front of the active speakershould be green. When first plugged in, it will sometimes take several secondsfor the Control 2.4G active speaker to initialize and “wake up.” Until then, thetop LED will be in red. Once the top LED is green, the bottom LED sho...

Page 8 - Adjusting the Volume; Application 1; Local Input; Subwoofer Output; A Word About Wireless Products; OPERATION

8 Adjusting the Volume Application 1 Adding surround speakers to a home theater system: In this application, the output level of your Control 2.4G active speakers will notonly be dependent on the volume setting of your A/V source; it will also needto be properly adjusted after installation and befor...

Page 9 - Important Safety Note:; Proper selection of mounting hardware not included; If the bracket needs; Make sure that the screw head is at least; WALL AND STAND PLACEMENT; CORRECT

9 Adjustable wall brackets are included for the two speakers and transmittermodule. The included brackets are for wall-mounting only. It is not to be usedfor ceiling mounting. Ceiling mounting of the Control 2.4G transmitter and/orspeakers is not recommended, regardless of bracket used. Wall-Mountin...

Page 10 - MAINTENANCE AND SERVICE

10 Wall-Mounting the Speakers UsingThird-Party Wall Brackets Each JBL On Air Control 2.4G wireless speaker contains a 1/4"-20 threadedinsert on the back to facilitate the use of third-party wall brackets. Please consult your JBL dealer or distributor for recommendations. NOTES: Customer is respo...

Page 11 - SPECIFICATIONS; 5 Watts per channel; RF Operating Frequency:

SPECIFICATIONS Frequency Range (±3dB): 50Hz – 20kHz Amplifier Output: 15 Watts per channel Low-Frequency Driver: 4" (100mm) Magnetically shielded High-Frequency Driver: 1/2" (12mm) Titanium-laminate, magnetically shielded Operating Range: Up to 70' (21m) depending upon conditions RF Operatin...

Page 12 - PRO SOUND COMES HOME

JBL and Control Series are trademarks of Harman International Industries, Incorporated, registered inthe United States and/or other countries. Pro Sound Comes Home is a trademark of Harman InternationalIndustries, Incorporated. ® PRO SOUND COMES HOME ™ Harman Consumer Group, Inc., 250 Crossways Park...