Invacare OCMK01 - Manuals - manualsarea.com

Page 2 - INSTALLATION OF THE ON CHAIR MOUNTING KIT; wheelchair parts or accessories.; IMPORTANT INFORMATION; INSTALLATION INFORMATION:; normally be placed between or behind the back uprights.

2 INSTALLATION OF THE ON CHAIR MOUNTING KIT BACK MOUNTING HARDWARE (FIGURE 1) NOTE: Refer to GENERAL and INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.NOTE: The wheelchair hardware consists of two (2) fixed release clamps and two (2 twist release clamps. The wheelchair hardwa...

Page 3 - secure the fised release clamp to the back cane. Securely tighten.

3 Twist Release Clamps. DETAIL "B" Mark FRONT OF WHEELCHAIR Fixed Release Clamp Internal Threaded Mounting Screw Washer Mounting Screw DETAIL "A" Upper J Brackets (Top Edge) Lower J Brackets (Bottom Edge) L Brackets Back Canes ContourU Back Mark Mark Mark Internal Threaded Mounting S...

Page 4 - INSTALLING THE BACK L BRACKETS (FIGURE 2); tions for the four (4) L brackets to obtain the desired back depth.; WOOD BACK; NOTE: ContourU cushion; FIGURE 2 - INSTALLING THE BACK L BRACKETS

4 INSTALLING THE BACK L BRACKETS (FIGURE 2) NOTE: When mounting the L brackets to the wood backed ContourU cushion the L brackets may be reversed to allow for greater seat depth adjustments as shown in DETAIL A of FIGURE 2. 1. Position the ContourU Back between the back canes and determine the mou...

Page 5 - INSTALLING THE BACK J BRACKETS (FIGURE 3); mounting position of the J brackets to obtain the desired depth.; FIGURE 3 - INSTALLING THE BACK J BRACKETS

5 INSTALLING THE BACK J BRACKETS (FIGURE 3) 1. Position the ContourU back between the back canes to determine the approximate mounting position of the J brackets to obtain the desired depth. 2. Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting holes on the L...

Page 6 - INSTALLING/REMOVING THE CONTOUR U SEATING; Installing; FIGURE 4 - INSTALLING/REMOVING THE CONTOUR U BACK

6 INSTALLING/REMOVING THE CONTOUR U SEATING SYSTEM BACK (FIGURE 4) Installing 1. Ensure that the twist release clamps are in the OPEN position as shown in DETAIL A of FIGURE 4. 2. Position the two (2) lower J brackets securely into the two (2) fixed release clamps as shown in FIGURE 4. 3. Position...

Page 7 - ADJUSTING THE CONTOUR U; ADJUSTING THE ON CHAIR MOUNTING KIT MOUNTING; DEPTH ADJUSTMENTS; Pan or Wood Back; FIGURE 5 - ADJUSTING THE

7 ADJUSTING THE CONTOUR U BACK DEPTH (FIGURE 5) NOTE: There are six (6) depth adjustments avail- able on the ContourU with a pan back.NOTE: There are twelve (12) depth adjustments available on the ContourU with a wood back. Six (6) mounting positions with the L brackets facing the front of the wheel...

Page 9 - INSTALLATION OF ON CHAIR MOUNTING KIT SEAT; wheelchair accessories.

9 INSTALLATION OF ON CHAIR MOUNTING KIT SEAT MOUNTING HARDWARE (FIGURE 7) NOTE: Refer to GENERAL and INSTALLATION WARNINGS in the SAFETY SUMMARY in this instruction sheet.NOTE: The wheelchair hardware consists of two (2) fixed release clamps and two (2) twist release clamps. The wheelchair hardware ...

Page 11 - INSTALLING THE SEAT L BRACKETS (FIGURE 8); wood backing of the seat cushion.; N O T E C o n t o u r U; FIGURE 8 - INSTALLING THE SEAT L BRACKETS

11 INSTALLING THE SEAT L BRACKETS (FIGURE 8) NOTE: When mounting the L brackets to the wood backed ContourU seat the L brackets may be reversed to allow for a wider range of seat height adjustments and shown in DETAIL A of FIGURE 8. 1. Position the ContourU seat between the seat rails and determin...

Page 12 - INSTALLING THE SEAT J BRACKETS (FIGURE 9); holes on the L bracket as shown in FIGURE 9.; FIGURE 9 - INSTALLING THE SEAT J BRACKETS

12 INSTALLING THE SEAT J BRACKETS (FIGURE 9) 1. Position the ContourU seat between the seat rails to determine the approximate mounting position of the J brackets to ensure the appropriate height setting. 2. Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting ...

Page 13 - FIGURE 10 - INSTALLING/REMOVING THE CONTOUR U SEATING

13 INSTALLING/REMOVING THE CONTOUR U SEATING SYSTEM SEAT (FIGURE 10) Installing 1. Ensure that the twist release clamps are in the OPEN position as shown in DETAIL A of FIGURE 10. 2. Position the rear J brackets securely into the fixed release clamps as shown in FIGURE 10.3. Position the front J b...

Page 14 - able on the ContourU seat with a seat pan.; NOTE: Refer to GENERAL and INSTALLATION; FIGURE 11 - ADJUSTING THE; Locknuts

14 ADJUSTING THE CONTOUR U SEAT HEIGHT (FIGURE 11) NOTE: There are six (6) height adjustments avail- able on the ContourU seat with a seat pan. NOTE: There are twelve (12) height adjustments available on the ContourU seat with a wood back. Six (6) mounting positions with the L brackets fac- ing the ...

Page 15 - ADJUSTING THE CONTOUR U SEATING SYSTEM SEAT ANGLE; remaining J bracket(s) on the opposite side of the ContourU seat.; FIGURE 12 - ADJUSTING THE CONTOUR U SEATING SYSTEM SEAT

15 ADJUSTING THE CONTOUR U SEATING SYSTEM SEAT ANGLE (FIGURE 12) NOTE: Before performing this procedure all four (4) J brackets must be adjusted to the same height. Refer to ADJUSTING THE CONTOUR U SEAT HEIGHT in this instruction sheet.NOTE: The seat angle is adjusted by repositioning the front and/...