Invacare MA90Z - Manuals

Invacare MA90Z – Manual in PDF format online.

Manuals:

Manual

Manual Invacare MA90Z

Summary

Page 2 - WARNING; qualified technician.; ACCESSORIES WARNING; SPECIAL NOTES; NOTICE; THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO

SPECIAL NOTES MA90 Series 2 Part No 1148139 WARNING DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with...

Page 3 - TABLE OF CONTENTS

TABLE OF CONTENTS Part No 1148139 3 MA90 Series TABLE OF CONTENTS SPECIAL NOTES ................................................................................ 2REGISTER YOUR PRODUCT ............................................................... 4TYPICAL PRODUCT PARAMETERS ...........................

Page 5 - TYPICAL PRODUCT PARAMETERS; Electrical Parameters

TYPICAL PRODUCT PARAMETERS Part No 1148139 5 MA90 Series TYPICAL PRODUCT PARAMETERS Electrical Parameters Performance Parameters MA90Z MA95Z INPUT VOLTAGE AC: 90 V INPUT FREQUENCY: 60 Hz CURRENT: 1 A 2 A MAXIMUM POWER CONSUMPTION: 30 ± 10 W 150 ± 10 W CIRCUIT PROTECTION: Dual fused, 250 V, 1 A fast ...

Page 6 - Mechanical Parameters

TYPICAL PRODUCT PARAMETERS MA90 Series 6 Part No 1148139 Mechanical Parameters Environmental Parameters MA90Z MA95Z CONTROL UNIT DIMENSIONS (L X W X H): 15” x 6½” x 11” CONTROL UNIT WEIGHT: 15 lbs CONTROL UNIT POWER CORD: 10 - 14 Feet Long, Hospital Grade CONTROL UNIT CONNECTION: Quad Flow - Four ¼”...

Page 7 - LABEL LOCATION; DANGER-EXPLOSION HAZARD: DO NOT use in the presence of; and understand the Owner’s/Operator’s Manual prior to using this; ATTENTION; Clean Filter Every 5 months and

LABEL LOCATION Part No 1148139 7 MA90 Series LABEL LOCATION DANGER-EXPLOSION HAZARD: DO NOT use in the presence of flammable anesthetics.CAUTION: Equipment should be connected to a properly grounded receptacle (3-prong). Risk of Electrical shock. DO NOT remove back. Disconnect air hose before admini...

Page 8 - SECTION 1—GENERAL GUIDELINES; operation and use of this product.; Contraindications; interchangeable and may result in entrapment or other injury.

SECTION 1—GENERAL GUIDELINES MA90 Series 8 Part No 1148139 SECTION 1—GENERAL GUIDELINES WARNING SECTION 1 - GENERAL GUIDELINES contains important information for the safe operation and use of this product. Contraindications ALWAYS consult the patient’s physician before using the MA90...

Page 9 - Fire Hazard; smoking is NOT permitted.; Anesthesia Equipment; There is an explosion risk if used with flammable anesthetics.; Oxygen; below mattress support level.; Electrical

SECTION 1—GENERAL GUIDELINES Part No 1148139 9 MA90 Series Fire Hazard DANGER Smoking DO NOT SMOKE while using this device. This system uses room air for circulation through the mattress. A cigarette can burn a hole in the bed surface and cause damage to the mattress. Also, patient clothing, bed she...

Page 10 - SECTION 2—OPERATION; CAUTION; Installing the Mattress Replacement System; CAUTION; occur when the head and foot ends are raised.

SECTION 2—OPERATION MA90 Series 10 Part No 1148139 SECTION 2—OPERATION CAUTION The control unit and mattress on the MA90Z series are designed to be used as a system. DO NOT replace mattresses or control units with other models or other brands. Otherwise, damage to the system may occur. Contact your ...

Page 11 - Installing the Side Rails

SECTION 2—OPERATION Part No 1148139 11 MA90 Series FIGURE 2.1 Installing the Mattress Replacement System Installing the Side Rails WARNING Patient entrapment with bed side rails may cause injury or death. Mattress MUST fit bed frame and side rails snugly to prevent patient entrapment. Follow the man...

Page 12 - Connecting the Hose; it cannot be stepped on, kinked, squeezed or otherwise damaged.

SECTION 2—OPERATION MA90 Series 12 Part No 1148139 Connecting the Hose CAUTION Ensure that the hose connecting the control unit to the mattress is routed such that it cannot be stepped on, kinked, squeezed or otherwise damaged. NOTE: For this procedure, refer to FIGURE 2.3. 1. Locate t...

Page 13 - Connecting the Power Cord; result in a potential safety hazard.

SECTION 2—OPERATION Part No 1148139 13 MA90 Series FIGURE 2.3 Connecting the Hose Connecting the Power Cord WARNING DO NOT alter plug to fit a non-conforming outlet. Instead, have an electrician install a properly grounded outlet. Failure to use the correct plug and outlet can result in a potential ...

Page 14 - Power Button

SECTION 2—OPERATION MA90 Series 14 Part No 1148139 Using the Front Panel NOTE: For this procedure, refer to FIGURE 2.4. FIGURE 2.4 Using the Front Panel Power Button 1. To turn the control unit on or off, press and release the Power button ( ). NOTE: Once ...

Page 16 - Automatic Wireless Fowler; Manual Operation of the Fowler

SECTION 2—OPERATION MA90 Series 16 Part No 1148139 3. Use the Select button to move the pointer to the times or attributes available for the selected function. 4. Use the Firmer or Softer buttons to change the times or attributes. Hold Button (...

Page 17 - Programming the Automatic Wireless Fowler Transmitter

SECTION 2—OPERATION Part No 1148139 17 MA90 Series Programming the Automatic Wireless Fowler Transmitter 1. Ensure the transmitter is inside the mattress pocket located on the right side of the mattress at the head end. 2. Ensure the mattress is in a ...

Page 19 - Lock/Alarm Silence Button; Powering Up the System

SECTION 2—OPERATION Part No 1148139 19 MA90 Series Lock/Alarm Silence Button 1. Press the Lock/Alarm Silence button ( ) to select one of the following modes: • Lock Mode ‐ Pressing this button locks out all control unit functions, including the On ...

Page 20 - Placing the Patient on the Mattress; before transferring the patient between the bed and the gurney.

SECTION 2—OPERATION MA90 Series 20 Part No 1148139 Placing the Patient on the Mattress 1. Press the Mode button or Max Inflate button to turn on the control unit to maximum flow. NOTE: In this mode, the Max Inflate LED lights up. 2. After the m...

Page 21 - Transferring Patient From/To a Wheelchair; Preparing for CPR Procedure

SECTION 2—OPERATION Part No 1148139 21 MA90 Series 4. Raise or lower the bed to match the gurney height. Refer to the owner ’s manual provided with the bed. 5. When the mattress has reached maximum firmness, perform one of the following: • Be...

Page 23 - Cleaning the System; pathogenic microorganisms.

SECTION 3—MAINTENANCE AND TROUBLESHOOTING Part No 1148139 23 MA90 Series SECTION 3—MAINTENANCE AND TROUBLESHOOTING Cleaning the System WARNING Before cleaning or disassembling the MA90 series, check the underside of the mattress folds for sharp objects such as scissors, needles, etc. These objects s...

Page 25 - Changing the Filter; Troubleshooting

SECTION 3—MAINTENANCE AND TROUBLESHOOTING Part No 1148139 25 MA90 Series Changing the Filter NOTE: For this procedure, refer to FIGURE 3.1 on page 25. Clean the filter every 5 months or whenever it is dirty. 1. Remove the two screws securing the filt...

Page 27 - NOTES

SECTION 3—MAINTENANCE AND TROUBLESHOOTING Part No 1148139 27 MA90 Series NOTES

Page 28 - LIMITED WARRANTY

LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. This warranty is extended only to the original purchaser who purchases this product when new and unused from Invacare or a dealer. This warranty is not...