Invacare CTMT-F - Manuals - manualsarea.com

Page 2 - Description of Kit; ITEM

Formula™ CG Tilt Manual Center Mount Front Rigging 2 Part No 1145733 Description of Kit NOTE: For this procedure, refer to FIGURE 1 on page 3. NOTE: This kit is for TDX™ SP wheelchairs with Formula CG Tilt Seating System. The Manual Center Mount Fron...

Page 3 - FIGURE 1; FIGURE 2; Removing the Existing Front Rigging Support

Part No 1145733 3 Formula™ CG Tilt Manual Center Mount Front Rigging FIGURE 1 Description of Kit Removing the Existing Front Rigging Support NOTE: For this procedure, refer to FIGURE 2. 1. Remove the two cap screws, two spacers and threaded block securing the fron...

Page 4 - Installing the Center Mount Front Rigging Support

Formula™ CG Tilt Manual Center Mount Front Rigging 4 Part No 1145733 Installing the Center Mount Front Rigging Support NOTE: For this procedure, refer to FIGURE 3 on page 5. NOTE: Right and left sides of the wheelchair are from the perspective of the seate...

Page 5 - FIGURE 3

Part No 1145733 5 Formula™ CG Tilt Manual Center Mount Front Rigging FIGURE 3 Installing the Center Mount Front Rigging Support 12W 13W 14W 15W 16W 12W 13W 14W 15W 16W 16W 17W 18W 19W 20W 21W 22W 23W 24W 16W 17W 18W 19W 20W 21W 22W 23W 24W ¼-20 X 1.50 inch Button Head Screw ¼-20 inch Locknut Plug Bu...

Page 6 - FIGURE 4; Mounting the Release Lever Assembly to the Seat Frame

Formula™ CG Tilt Manual Center Mount Front Rigging 6 Part No 1145733 Mounting the Release Lever Assembly to the Seat Frame NOTE: For this procedure, refer to FIGURE 4. NOTE: The release lever assembly consists of the release handle, cable and ratchet housing. 1....

Page 7 - Removing; FIGURE 5; Removing/Installing the Manual Center Mount Footrest

Part No 1145733 7 Formula™ CG Tilt Manual Center Mount Front Rigging Removing/Installing the Manual Center Mount Footrest NOTE: For this procedure, refer to FIGURE 5. Removing 1. Remove the rigging pivot pin that secures the footrest to the mounting bracket of ...

Page 8 - WARNING; For; FIGURE 6; Adjusting the Height of the Manual Center Mount Footrest

Formula™ CG Tilt Manual Center Mount Front Rigging 8 Part No 1145733 Adjusting the Height of the Manual Center Mount Footrest WARNING While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a min...

Page 9 - FIGURE 7; Adjusting the Angle of the; FIGURE 8; Adjusting the Footplate Angle

Part No 1145733 9 Formula™ CG Tilt Manual Center Mount Front Rigging Adjusting the Angle of the Manual Center Mount Footrest WARNING While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a mini...

Page 10 - FIGURE 9; Adjusting the Tension of the Flip Up Footplate

Formula™ CG Tilt Manual Center Mount Front Rigging 10 Part No 1145733 Adjusting the Tension of the Flip Up Footplate NOTE: For this procedure, refer to FIGURE 9. NOTE: The tension can be adjusted to increase or decrease the rotation effort of the flip up ...

Page 11 - LIMITED WARRANTY

Part No 1145733 11 Formula™ CG Tilt Manual Center Mount Front Rigging LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.This warranty is extended only to the original purchaser/user of our products.This...