Page 2 - GO 3 User Manual; Contents; Basic Use
GO 3 User Manual Contents Product Introduction ............................................................................................ 1 GO 3 Introduction .............................................................................................................. 1 Standard Accessories .........
Page 3 - Product Introduction; GO 3 Introduction
GO 3 User Manual 1 Product Introduction GO 3 Introduction 1. Flip Touchscreen 2. Action Pod Indicator Light 3. Shutter Button 4. Power Button 5. Charging Point 6. Quick Button 7. Mounting Latch 8. Release Switch 9. Type-C Charging Port 1. Microphone 2. Lens 3. GO 3 Button 4. Camera Indicator Light 5...
Page 4 - Standard Accessories; Accessories
GO 3 User Manual 2 Standard Accessories GO 3 and the Action Pod can be mounted on different accessories for flexible shooting wherever you go. Accessories Description Figure MagnetPendant Wear the Magnet Pendant byplacing it inside your clothing.Then, attach the camera to thefront of the Magnet Pend...
Page 5 - Pivot Stand
GO 3 User Manual 3 Pivot Stand Can be used with GO 3 or theAction Pod. How to Use: 1. Press the buckles on the two sides of the Pivot Standand attach GO 3 or the ActionPod onto it. Make sure thecamera's direction is the sameas the camera mark on thePivot Stand. 2. Remove the silicone protective cove...
Page 6 - Easy Clip; First Use; Charging; GO 3 Charging Time
GO 3 User Manual 4 Notes:The base of the Pivot Stand can be disassembled. The 1/4'' mounting point on thebottom of the Pivot Stand supports use with other accessories. Easy Clip Insert GO 3 into the Easy Clipand ensure it is secure. Attach the Easy Clip onto theedge of a hat or other objectand adjus...
Page 7 - Activation; Click
GO 3 User Manual 5 Place GO 3 camera inside the Action Pod and connect the charging cable to the Action Pod. Whilecharging, both the camera and the Action Pod's indicator light will be solid red. The correspondingindicator light will turn off when the device is fully charged. Once both indicator lig...
Page 8 - Action Pod Button Instructions
GO 3 User Manual 6 Basic Use Action Pod Button Instructions Power Button: • Press once: ￮ Power on GO 3. ￮ Wake GO 3 up （ when GO 3 is not in the Action Pod ） . ￮ Turn the Action Pod's touchscreen on/off. • Long press for 2 seconds: Power off (release the button when the power-off animation appears)...
Page 9 - Quick Button; GO 3 Button Instructions; Take a photo or start/stop video recording.
GO 3 User Manual 7 Quick Button • Single press: Press once to enter the preset menu or switch shooting modes. Press again to switch betweendifferent modes or presets. The first time you press this it will enter the Shooting Mode page by default. Tap the switch icon inthe upper left corner to enter t...
Page 10 - Using them separately:
GO 3 User Manual 8 Using GO 3 and Action Pod • Using them together: When the camera is in the Action Pod, it functions as one action camera and the buttons on the camerabody are disabled. You can control the camera with the buttons on the Action Pod or via the app. • Using them separately: When GO 3...
Page 11 - GO 3 Camera Button customization:
GO 3 User Manual 9 GO 3 Camera Button customization: The button functions of the GO 3 camera can be customized according to your preferences. You can adjust them through the app settings page or within the Action Pod.
Page 12 - Using the Touchscreen
GO 3 User Manual 10 Using the Touchscreen The touchscreen's main display shows the current camera shooting mode. The menu bar shows batterylevel, storage capacity, and current shooting parameters. By swiping or tapping the screen, you canachieve the following: Tap the screen Hide/show information on...
Page 13 - Shortcut Menu; Lock screen
GO 3 User Manual 11 Shortcut Menu 1. Storage: Shows the remaining number of photos or the length of video footage that can be stored on the microSD card. 2. Lock screen 3. Timed Capture 4. Preset 5. Wi-Fi Signal 6. Bluetooth: This will be displayed when the camera is not in the Action Pod. 7. GO 3 B...
Page 15 - Camera Settings
GO 3 User Manual 13 Camera Settings Swipe down on the touchscreen to view camera settings. 1. Screen Orientation: Turn on/off. It is turned on by default. 2. Lock Screen: Tap to lock screen. Swipe up on the touchscreen to unlock. 3. Volume Control: Set the camera speaker volume. There are four optio...
Page 18 - Storage
GO 3 User Manual 16 TimeShift Filters, Shutter, ISO, WB, EV Slow Motion Filters, Shutter, ISO, WB, EV Loop Recording Filters, Shutter, ISO, WB, EV, Low-light Stabilization Starlapse Shutter, ISO, WB, EV Interval Shutter, ISO, WB, EV HDR Photo AEB, WB, EVs Album Page Swipe right from the left of the ...
Page 19 - Indicator Lights
GO 3 User Manual 17 Indicator Lights GO 3 and the Action Pod have separate LED status indicator lights. Camera/Action Pod's Indicator Light Status Camera/Action Pod Status Slowly flashing cyan, then solid Camera/Action Pod is powering on Flashing cyan five times Camera/Action Pod is powering off Off...
Page 20 - Connect to the Insta360 app; here
GO 3 User Manual 18 Insta360 App Connect to the Insta360 app 1. Click here to download the Insta360 app. Alternatively, search "Insta360" in the App Store or Google Play Store to download the Insta360 app. 2. Press the Power Button to turn on GO 3. 3. Enable Wi-Fi and Bluetooth on your smart...
Page 21 - Android Mode; File Transfer
GO 3 User Manual 19 Android Mode 1. Place GO 3 camera is in the Action Pod and connect GO 3 to your Android phone with the USB-C cable. 2. A notification for Android Mode will pop up. 3. Open the Insta360 app to control the camera and access the camera's footage. App Interface Enter the shooting int...
Page 22 - Transfer files between the Insta360 app and your Windows PC
GO 3 User Manual 20 Transfer files between the Insta360 app and your Windows PC - iPhone 1. Install iTunes on your PC. Connect your iPhone to your PC, open iTunes, then complete the authorization process according to the instructions. 2. After successful authorization, click the iPhone icon in the t...
Page 24 - Maintenance; Firmware Update
GO 3 User Manual 22 Maintenance Firmware Update Firmware updates will be regularly available for both GO 3 and the Action Pod to ensure that they runefficiently. Please update to the latest version for optimal results. Before updating, make sure that GO 3 and the Action Pod have at least 25% battery...
Page 25 - Waterproofing; be installed on the camera for underwater use.
GO 3 User Manual 23 Waterproofing 1. GO 3 (when taken out of the Action Pod) is waterproof up to 16ft (5m). The included Lens Guard must be installed on the camera for underwater use. 2. The Action Pod is IPX4 water resistant only when GO 3 is installed. It protects against light rain and snow, but ...
