Insignia NS-WG1542 - Manuals

Page 2 - CORNER TV STAND; SAFETY INFORMATION AND SPECIFICATIONS; Maximum overall weight:

2 CORNER TV STAND www.insigniaproducts.com SAFETY INFORMATION AND SPECIFICATIONS CAUTION: The top surface of this stand is designed for use with a product weighing no more than 70 lbs. (31 kg) and having a width that permits it to sit evenly on the stand with no more than a one-inch overhang on each...

Page 3 - PACKAGE CONTENTS: HARDWARE

3 CORNER TV STAND www.insigniaproducts.com Caution : Do not use power tools to assemble your stand. Note : Make sure that you have all the hardware necessary to assemble your new TV stand. PACKAGE CONTENTS: HARDWARE Note: The table below shows the required hardware. You may receive extra hardware. T...

Page 4 - PACKAGE CONTENTS: PARTS

4 CORNER TV STAND www.insigniaproducts.com PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand. While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use...

Page 5 - ASSEMBLY INSTRUCTIONS

5 CORNER TV STAND www.insigniaproducts.com ASSEMBLY INSTRUCTIONS Step 1: Preparing the legs and frame. Caution : Do not fully tighten allen bolts ( L ) until Step 2. 1 Screw four floor levelers ( J ) into the holes in the legs ( A ). 2 Connect the slots on the legs ( A ) to the slots on the frame ( ...

Page 6 - Attaching the back panel and the top shelf

6 CORNER TV STAND www.insigniaproducts.com Step 2 : Attaching the back panel and the top shelf CAUTION: Tempered safety glass is used. It is stronger than normal glass, and it will not break into long, sharp, knife-like shards. However, safety glass can break. When safety glass breaks, it instantly ...

Page 7 - Attaching the middle and bottom shelves.

7 CORNER TV STAND www.insigniaproducts.com Step 3 : Attaching the middle and bottom shelves. 1 Carefully place the smaller bottom shelf ( G ) onto the glass spacers in the frame and into the shelf supports. 2 Screw two shelf bolts ( O ) into the holes in the bottom shelf supports - do not overtighte...

Page 8 - Adjusting the floor levelers.

8 CORNER TV STAND www.insigniaproducts.com Step 4 : Adjusting the floor levelers. • Make sure all floor levelers are adjusted properly and have firm contact with the floor. DO NOT exceed the weight limits shown. CAUTION! : When moving the stand, do not lift the glass top. Use two adults and lift fro...

Page 9 - CARE AND MAINTENANCE; Glass; WARNING

9 CORNER TV STAND www.insigniaproducts.com CARE AND MAINTENANCE Wood/Laminate • Use your favorite type of furniture polish. • Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand. • Always test any polish in a discrete location first, such as the back of the stand...

Page 11 - How long does the coverage last?

11 CORNER TV STAND www.insigniaproducts.com ONE-YEAR LIMITED WARRANTY - INSIGNIA Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer...