Insignia NS-TVMFP23-C - Manuals

Page 2 - Safety information and specifications; Do; We’re here for you

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 2 www.insigniaproducts.com Safety information and specifications IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONSCAUTION: Do not use this product for any purpose not explicitly specified by Insignia.Improper installation may cause property damage or...

Page 3 - Tools needed; Package contents

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 3 www.insigniaproducts.com Tools needed You will need the following tools to assemble your new TV wall mount: ard ware Package contents Make sure that you have all the hardware necessary to assemble your new TV wall mount: A Wall Plate (1) C Right TV Brack...

Page 4 - TV Hardware Bag; Label

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 4 www.insigniaproducts.com TV Hardware Bag Label Hardware Qty. D 4 E 4 F 4 G 4 H 4 I 4 J 4 M5 × 12 mm screw M5 × 35 mmscrew M5 washer M6/M8 washer Spacers M6 × 12 mm screw M6 × 20 mm screw Label Hardware Qty. K 4 L 4 M 4 N 4 O 4 P 4 M6 × 35 mm screw M8 × 1...

Page 5 - Installation instructions; Flat back

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 5 www.insigniaproducts.com Installation instructions STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scrat...

Page 6 - Select either an M5 washer (

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 6 www.insigniaproducts.com STEP 2 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If there are screws that came with the TV, they are alm...

Page 7 - Align the left and right TV brackets (; You’ll need

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 7 www.insigniaproducts.com STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 Align the left and right TV brackets ( B and C ) with the screw holes on the back of the TV. Make sure that the brackets are level. 2 Install washers ( ...

Page 10 - Option 1: Installing on a wood stud* wall; Note

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 10 www.insigniaproducts.com STEP 5 - Option 1: Installing on a wood stud* wall Note : Any drywall covering the wall must not exceed 5/8 in. (16 mm). 1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder. 2 Align the wall plate t...

Page 11 - Option 2: Installing on a solid concrete or concrete; Mount wall plate directly onto the concrete surface.

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 11 www.insigniaproducts.com STEP 5 - Option 2: Installing on a solid concrete or concrete block wall* CAUTION: To prevent property damage or personal injury, never drill into mortar between blocks. Mount wall plate directly onto the concrete surface. 1 Ali...

Page 12 - STEP 6 - Mounting the TV to the wall plate; and; B C

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 12 www.insigniaproducts.com STEP 6 - Mounting the TV to the wall plate 1 Holding the TV with the top of the screen tilted toward the wall, slide the upper notches of the right and left TV brackets ( B and C ) over the upper lip of the wall plate ( A ). 2 P...

Page 13 - Removing the TV from the wall plate

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in. 13 www.insigniaproducts.com Removing the TV from the wall plate 1 Grasp the TV by the bottom edge, then pull down on the locking cords and pull the bottom of the TV out from the wall. 2 Release the locking cords and lift the top of the TV from the wall bra...

Page 17 - V2 ENGLISH

www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) INSIGNIA is a trademark of Best Buy and its affiliated companies.Registered in some countries.Distributed by Best Buy Purchasing, LLC7601 Penn Ave South, Richfield, MN 55423 U.S.A.©2014 Best Buy. All rights reserve...