Insignia NS-MG1158 - Manuals

Page 2 - QUICK-SETUP GLASS AND METAL TV STAND; SAFETY INFORMATION AND SPECIFICATIONS; -inch overhang on each side; Top shelf

2 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com SAFETY INFORMATION AND SPECIFICATIONS CAUTION: The top surface of this stand is designed for use with a product weighing no more than 300 lbs. (136 kg) and having a width that permits it to sit evenly on the stand with no more than a on...

Page 3 - PACKAGE CONTENTS: PARTS

3 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com PACKAGE CONTENTS: PARTS A Stand body(1) B Top glass shelf (1) C Middle glass shelf (1) D Bottom glass shelf (1) J Rear support bar (1) NS-MG1158_14-1390_MAN_V2_ENG.fm Page 3 Monday, December 15, 2014 8:21 AM

Page 4 - PACKAGE CONTENTS: HARDWARE

4 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com PACKAGE CONTENTS: HARDWARE Note: You may receive extra hardware. Make sure you have all the hardware necessary to assemble your new TV stand: Label Hardware Qty. E 2 F 2 G 2 H 2 Large thumbscrew Locking peg Small thumbscrew Rubber pad A...

Page 5 - ASSEMBLY INSTRUCTIONS

5 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com ASSEMBLY INSTRUCTIONS Step 1: Unfolding the stand body. • Unfold the stand body ( A ), then insert and tighten two large thumbscrews ( E ) into the right side of the rear panel. You’ll need: E (2) NS-MG1158_14-1390_MAN_V2_ENG.fm Page 5 ...

Page 6 - Step 2: Attach the rear support bar

6 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com I Step 2: Attach the rear support bar 1 Attach the rear support bar ( J ) to the top metal frame with the medium thumbscrew ( K ). 2 Insert the two locking pegs ( F ) into the bottom side of the top glass shelf ( B ). You’ll need: K (1)...

Page 7 - Step 3: Mounting the top shelf

7 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com Step 3: Mounting the top shelf • Turn the top shelf over and align the locking pegs with the holes in the top of the back support frame and align the metal pegs with holes in the side of the frame. Lock the locking pegs in place by rota...

Page 8 - Step 4: Securing the top shelf

8 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com Step 4: Securing the top shelf 1 Secure the top shelf to the steel frame with the small thumbscrews ( G ) and attach two rubber shelf pads ( H ). 2 Insert two large suction cups ( L ) and three small suction cups ( M ). You’ll need: G (...

Page 9 - Step 5: Installing the middle and bottom shelves

9 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com Step 5: Installing the middle and bottom shelves • Install the remaining shelves ( C and D ). Lock the middle shelf ( C ) into place with the T-shaped shelf lock ( I ). You’ll need: I (1) NS-MG1158_14-1390_MAN_V2_ENG.fm Page 9 Monday, D...

Page 10 - Step 6: Installing the optional tipping restraint

10 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com Step 6: Installing the optional tipping restraint • Install the tipping restraint hardware by removing the top thumbscrew, placing the loop on the tipping restraint over the thumbnail screw hole, then replacing the thumbscrew. You’ll n...

Page 11 - CARE AND MAINTENANCE; Glass; WARNING

11 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com CARE AND MAINTENANCE Glass • Use a commercial liquid glass cleaner and a soft cloth. • Do not use harsh powders or any other abrasive substances as they will scratch the glass. WARNING Please use your stand correctly and safely. Improp...

Page 13 - How long does the coverage last?

13 QUICK-SETUP GLASS AND METAL TV STAND www.insigniaproducts.com ONE-YEAR LIMITED WARRANTY - INSIGNIA Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the ...