Page 2 - OPERATING AND SAFETY PRECAUTIONS; = Hazards or unsafe practices which
Page 2 of 8 PD05P-XXX-XXX-B (en) WARNING EXCESSIVE AIR PRESSURE. Can cause personal injury, pump damage or property damage.Do not exceed the maximum inlet air pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fl uid pressures developed by th...
Page 3 - WARNING; EXCESSIVE AIR PRESSURE. Can cause pump dam-; TYPICAL CROSS SECTION; Figure 2
PD05P-XXX-XXX-B (en) Page 3 of 8 Hytrel®, Tefl on® and Viton® are registered trademarks of the DuPont Company Kynar® is a registered trademark of Arkema Inc. ARO® is a registered trademark of Ingersoll-Rand Company Santoprene® is a registered trademark of Monsanto Company, licensed to Advanced Elast...
Page 4 - SEAT OPTIONS
Page 4 of 8 PD05P-XXX-XXX-B (en) PARTS LIST / PD05P-XXX-XXX-B FLUID SECTION 637427-XX Fluid section service kit includes: Balls (see Ball Option, refer to -XX in chart below), Diaphragms (see Diaphragm Option, refer to -XX in chart below) and item 19 (listed below) plus items 144, 174 and 94276 Lubr...
Page 5 - which contact pump case when using stainless steel fasteners.; FOR THE AIR MOTOR SEC-; Figure 3; COLOR CODE; Torque Sequence
PD05P-XXX-XXX-B (en) Page 5 of 8 22 19 21 29 77 27 15 21 22 29 19 60 (PD05P-XES-XXX-B, PD05P-XLS-XXX-B, PD05P-XRS-XXX-B) 63 60 (PD05P-XDS-XXX-B, PD05P-XKS-XXX-B, PD05P-XPS-XXX-B) 18 26 61 (PD05P-XES-XXX-B, PD05P-XLS-XXX-B, PD05P-XRS-XXX-B) 63 61 (PD05P-XDS-XXX-B, PD05P-XKS-XXX-B, PD05P-XPS-XXX-B) 17...
Page 6 - DIAPHRAGM PUMP SERVICE; GENERAL SERVICE NOTES:; Air Motor Section service is continued from Fluid Section repair.; AIR MOTOR PARTS LIST
Page 6 of 8 PD05P-XXX-XXX-B (en) Items included in fl uid section service kit, see page 4. MATERIAL CODE [B] = Nitrile [PPG] = Glass fi lled Polypropylene [C] = Carbon Steel [SS] = Stainless Steel [Ck] = Ceramic [Sy] = Syn-Seal [D] = Acetal [U] = Polyurethane DIAPHRAGM PUMP SERVICE GENERAL SERVICE N...
Page 7 - Figure 4; ASSEMBLY TORQUE REQUIREMENTS; Apply Lubriplate FML-2 grease to all “O” rings, “U” cups and mat-; MAJOR VALVE REASSEMBLY; LIPS; PILOT VALVE PARTS
PD05P-XXX-XXX-B (en) Page 7 of 8 PARTS LIST / PD05P-XXX-XXX-B AIR MOTOR SECTION Figure 4 ASSEMBLY TORQUE REQUIREMENTS NOTE: DO NOT OVERTIGHTEN FASTENERS. (123) screw, 4 - 6 in. lbs (0.45 - 0.68 Nm).(134) bolt, torque to 15 - 20 in. lbs (1.7 - 2.3 Nm), wait 10 minutes, then re-torque to 15 - 20 in. l...
Page 8 - DIMENSIONAL DATA; DIMENSIONS; Figure 5; TROUBLE SHOOTING; Product discharged from exhaust outlet.
Page 8 of 8 PD05P-XXX-XXX-B (en) PN 97999-1164 DIMENSIONAL DATA DIMENSIONS A - 10-1/32” (254.8 mm)B - 10-3/32” (256.1 mm)C - 6-3/16” (157.1 mm)D - 2” (51.0 mm)E - 6-3/4” (171.0 mm) F - 6-1/32” (153.1 mm)G - 10-29/32” (276.8 mm)H - 4-29/32” (124.2 mm)J - 5-17/32” (140.2 mm)K - 5/16” (8.0 mm) L - 1-15...