ILVE HP1230DT - Manuals

08 09 BUIL T-IN C OOK TOPS Before installing and operating the hotplate, read these instructions completely and carefully. IMPORTANT To be installed only by an authorised person - Remove all packaging material and literature from the hotplate before connecting the gas and electrical supplies INSTALL...

10 11 LIGHTING BURNERS – simply press the knob in, turn anti-clockwise to maximum, the electronic igniter will spark and ignite the burner. Check that the gas has been lit; if the burner fails to ignite repeat the above process. For models with Flame Failure follow the above procedure but keep the k...

16 17 INSTRUCTIONS FOR USE OF THE ELECTRIC PLATE The vitreous ceramic electric plate (5) is controlled by a knob (as above energy regulator). A pilot light comes on as soon as the heating element is activated. The control knob is graded from 0 to 12. Position 0 indicates that the corresponding cooki...

18 19 Cut Out Dimensions for Built-in H / HF Series Cut Out Dimensions for Built-in HP / XLP Series Overall Dimensions for P Series Freestanding BUILT-IN INSTALLATION To avoid liquid infiltrations under the working tops, it is necessary to apply a gasket which is supplied with the top. The fixing to...

20 21 Ensure when fitting the elbow supplied with the appliance that the sealing washer is used to prevent gas leaks. Warning : on the cooking top, it is forbidden to carry out the gas connection by means of the rubber flexible pipe fixed onto the rubber hose, as it is not possible to inspect the pi...

22 23 Burners, Injectors & Mega-joules AIR ADJUSTMENT The air adjustment is to be carried out with the flame at the maximum, with a screwdriver loosen screw “F” and move the cylindrical sleeve “R” towards the injector to decrease the air, move it away from the injector to increase the air. Once ...

24 25 Examples: A. Flame with excess of air: it is small, tight and separated. Move forward the cylindrical sleeve R placed in front of the injector. B . Flame with lack of air; it is floppy with yellow streaks. Move backward the cylindrical sleeve R placed in front of the injector. C . Normal flame...

26 27 Pressure Adjustment First turn the gas off to the appliance. Remove the sealing screw from the regulator’s test point at the rear of the appliance and place the hose of the Manometer onto it. Turn the gas on to the appliance and light the Wok Burner and Small Burner at maximum setting. Check t...

36 37 Eurolinx Pty Limited A.B.N. 50 001 473 347 trading as ILVE (“ILVE”) Office: 48-50 Moore Street, Leichhardt N.S.W 2040 Post: Locked Bag 3000, Annandale, N.S.W 2038 P: 1300 856 411 WARRANTY REGISTRATION Your ongoing satisfaction with your ILVE product is important to us. We ask that you complete...

38 39 01012018 facebook.com/ILVEappliances twitter.com/ILVE_appliances youtube.com/ILVEappliances livewithilve.com You can now find us on: PROBLEM ANSWER COOKTOP S My burners will not ignite • Check to see if the brass burners are placed correctly into the aluminium base. This is very important as i...