ILVE HCB70CSS - Manuals

16 17 OPERATION / USER BE CAREFUL: always check that the burners are correctly positioned, thus having a homogeneous and not noisy flame. Always check that the screws below the burner are fixed. INSTRUCTIONS FOR USE Correct use of burners Positioning of the burners Burners Medium Large Dual ring Fis...

20 21 OPERATION / USER INSTRUCTIONS FOR USE Use of the gas fry-top Instructions The fry top consists of a stainless steel plate, suitable for contact with food [ ] with a uniform temperature of the cooking surface and with a very low heat dispersion. To use the appliance, light the flame underneath ...

In order to preserve the quality of the coating, some cleaning and washing methods are recommended: • Allow the product to cool to room temperature before cleaning. It is advisable not to immerse it in cold water when it is still hot. • Wash with warm water, and with a minimum of neutral detergent. ...

Pic. 3 Sealing ring Any adjustment, maintenance, etc... must be made by an authorised technician after having disconnected the appliance from the mains and shut off the gas sup- ply. Sealing ring Pic. 4a Junction Sealing ring Pic. 4b Junction INSTALLATION Gas connection and transformation The hobs a...

INSTALLATION Gas regulation A B Flame with too much air: small and drawn. Decrease the“X” amount U U Flame with scant air: Irregular with yellow points. Increase the “X” amount. U U C Correct flame: Blue U U F X R U X R U C Pic. 6 Examples of air regulation (for information) Pic. 7 F X R U X R U C P...

1. Remove the grill and the burners from the hob. 2. SR – R – P burners: unscrew injectors “U” using a 7-mm spanner (fig. 8) and replace them with those for the new gas according to table number 2 on page 20. 3. DCC – Dual burners: unscrew the 2 screws “P” and remove cover “C” fig. 9. unscrew inject...

When installing the appliance, we recommend checking that the hob’s burner minimum has been properly adjusted: a proper adjustment is that when passing from the maximum position to the minimum position, the flame is reduced, stable and homogeneous. If the flame on minimum is incorrect or if the gas ...

K1 M 66 11 P2 22 P3 5 C 33 S6 PE N F 2 1 3 4 P1 66 11 P2 P3 5 C 2 1 3 4 P1 1 2 4 3 554433 22 33 PE 1 2 4 3 554433 K14 K15 45 AA SP 66 MA MA MA MA MA 11 Models H392…, H391… SP AA 66 11 11 MA MA MA RE 00 S5 MA MA N F M 11 66 P2 4 00 P1 2 00 R5 K1 K15 K16 45 § WIRING DIAGRAMS § = only models with elect...

iWarranty REGISTER YOUR WARRANTY ONLINE NOW GO TO: ilve.com.au > support > product registration As a part of our continued customer service offering, you can now register your ILVE products online at ilve.com.au > support > product registration Just follow our simple online registration ...

46 46 5. Proof of Purchase Customers must retain proof of purchase in order to be eligible to make a warranty claim in respect of an ILVE product. 6. Claiming under the Warranty Customers will bear the cost of claiming under this Warranty unless ILVE determines the expenses are reasonable, in which ...