Page 2 - CAUTION; Warnings and Precautions; TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO
This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol, located on back or bottom of the uni...
Page 3 - Important Safety Instructions
1. Read Instructions - All the safety and operating instruction should be read before the product is operated. . Retain Instructions - The safety and operating instruction should be retained for future reference. . Heed Warnings - All warning on the product and in the operating instructions should b...
Page 4 - • Certified iPod Connector installed for
4 Features In the Box • IS608B • Brackets for iPods • Remote Control • Documentation • Certified iPod Connector installed for iPod docking • Recharge Circuit for iPod/mini/nano/ photo/video • Controls Connected iPod players • Stereo Speakers built in • Digital Tune AM/FM Stereo Radio with Station Me...
Page 5 - when inserted into the remote.
Powering the Unit 5 Power the unit by connecting it to a standard AC outlet (10V ~ 60Hz) via the at- tached AC cord. AC 10V / 60Hz Changing the Remote Battery LITHIUM BA TTER Y CR 2025 3V CR2025 PUSH OPEN LITH IU M BA TT ER Y CR 2025 3V CR2025 PUSH OPEN 1. Push the Release Button and pull out the Ba...
Page 6 - Docking an iPod; that fits the iPod that; Docking Station; Playing an iPod; Power/Alarm Off Button
Docking an iPod 6 1. Locate the numbered Bracket that fits the iPod that will be docked. Each included Bracket has a number on it, indicating which iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed. . Snap the Bracket into place over ...
Page 7 - Setting the Time; until the time begins to flash on the; Setting the Alarms; until the alarm time begins to flash
7 Setting the Time 1. Turn the unit off by pressing the Power/Alarm Off Button . . Press and hold the Clock/Preset Button until the time begins to flash on the LCD Display. . Press the Skip/Search Buttons to adjust the hour. 4. Press the Clock/Preset Button to set the hour. 5. Press the Skip/Search ...
Page 8 - Tuning the AM/FM Radio; Saving Radio Stations to the Unit’s Memory
8 Tuning the AM/FM Radio 1. Turn the unit on by pressing the Power/Alarm Off Button . . Press the Source Button to switch the unit to radio mode. . Press the Stop/AM/FM Button to switch between AM and FM radio modes. 4. Press the Skip/Search/Tune/Hour/Minute Buttons to tune the AM or FM radio. Savin...
Page 9 - Connecting to an Audio Player using the Aux Input; an Mp Player or Other Audio Source.; Source Button; to switch the unit to Aux mode
9 Connecting to an Audio Player using the Aux Input When connecting two products using an RCA Cable, match the colored ports with the same colored connection. (Red to Red, White to White, and Yellow to Yellow) 1. Plug one end of a .5 mm Cable (not included) or a .5 mm - RCA Cable (not included) into...
Page 10 - Locations of Controls
10 Locations of Controls CLOCK/PRESET iPod SOURCE EQ ALARM OFF POWER L M U E O V M M/F A P + T R S E E ALM 2 ALM 1 DISPLAY H R/ M IN + – NI M / R H TU N ER + – RE N U T 6 5 4 1 89 10 11 1 1 7 IS608B-IB.indd 10 4/7/008 10:41:4 AM
Page 11 - Control Definitions; Press the iPod Button to switch the unit to iPod mode.
Control Definitions 11 1 Clock/Preset Button Press and hold the Clock/Preset Button, with the unit turned off, to set the clock. Press the Clock/Preset Button, in radio mode, to save a radio station to the unit’s memory. 2 iPod Button Press the iPod Button to switch the unit to iPod mode. 3 Source B...
Page 13 - is built into the Clock Radio.; 4 Shuffle Button; Press the Album Button to cycle through albums on a docked iPod.
Control Definitions 1 14 LCD Display Use the LCD Display to view the time, alarm time, radio frequency and unit’s current source. 15 Auxiliary Input Use the Auxiliary Input to connect an MP player or other audio device to the unit. 16 Headphone Jack Use the Headphone Jack to connect a set of headpho...
Page 15 - 9 Source Button; 4 Volume Buttons
Control Definitions 15 29 Source Button Press the Source Button to switch the unit between radio and aux mode. 30 iPod Button Press the iPod Button to switch the unit to iPod mode. 31 Stop/AM/FM Button Press the Stop/AM/FM Button to stop a docked iPod during play. Press the Stop/AM/FM Button in radi...
Page 16 - Service Information; Address
© 007 DPI, Inc. iPod not included. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. TruBass, SRS and the SRS logo are trademarks of SRS Labs, Inc. All other trademarks appearing herein are the property of their respective owners. Service Information Address 116 Carr Str...