Ikelite Olympus E-3 - Manuals

5 When using an external strobe, slide the housing hotshoe connector into the hotshoe camera mount Slide the connector forward until it stops. This can be done after the camera is secured with the mounting bolt. External Strobe Connector Waterproof Cap O'ring Housing Back Hotshoe CCaauuttiioonn:: Do...

IInnssttaalllliinngg tthhee ZZoooom m CCllaam mpp & & GGeeaarr SSlleeeevvee O Onn TTyyppee 22 LLeennsseess Due to the larger diameter of lens opening on Type 2 lenses, the Zoom Clamp and Gear Sleeve need to be installed from the rear (bayonet end) of the lens. Use the housings Lens Release C...

13 IInnssttaalllliinngg tthhee PPoorrtt There are two port locks on the front of the housing. (See housing front) Each port lock has a Release Button, lift the release button and slide each Port Lock away from the port opening. In the unlocked position the Release Button will remain in the up positi...