iHome iBN97 - Manuals

iBN97 2 P6 Meet Your iBN97 Top Nap/Clock Set Button Mode Button Power Button Talk/End Buttons NFC Antenna Plus/Minus Settings Buttons Volume Up Button EQ/Pairing Button Volume Down Button Play/Pause and Presets Button Wakeup/Alarm Skip Button Sleep Button Snooze/Dimmer Button Microphone Alarm 1 &...

DC Jack USB Charging Port Aux-in Jack iBN97 P7 Meet Your iBN97 Back Bottom 3 usb charging DC 12V 2.5A FM Antenna Backup Battery Compartment Remove the pull tab before initial use to activate the SureAlarm battery backup system.

iBN97 Using the Setting Up the Unit The Display Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet. 4 P8 Alarm Active Indicator Bluetooth Indicator PM/AM Indicators Date, Alarm time, Mode Indicator: Radio, Bluetooth, Aux-...

iBN97 Using the 5 Setting the Clock FM Radio P9 1. Press and hold the Nap/Clock Set Button for 2 seconds until the clock display flashes and unit beeps. 2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The AM and ...

3. Press the or Buttons to adjust the volume on the unit. To adjust the tone, press and release the EQ Button as needed to cycle to Treble, Bass or Balance, then press the – or + Buttons to adjust for best sound. 4. When you are through listening, press the Button to turn the unit off. 6 Setting and...

iBN97 Using the Setting and Using the Alarms 7 P11 This unit has 2 separate alarms, each set the same way. Below we explain how to set alarm 1.To set alarm 2, follow the same steps using the Alarm 2 Button. 1. Press and hold the Alarm 1 Button for 2 seconds until the alarm time flashes at the bottom...

iBN97 Using the 8 P12 Setting and Using the Alarms (cont’d) 8. Press the – or + Buttons to adjust the alarm volume on the unit. Note that the alarm volume setting is stored separately from other volume settings. 9. Press the Alarm 1 Button to confirm the alarm settings and exit alarm setting mode. 2...

iBN97 Using the Snooze/Dimmer Button 9 P13 1. To program Snooze, press and hold the Snooze/Dimmer Button during normal operation (when no alarm is sounding). 2. Press the – or + Buttons to select the desired snooze time (between 1 and 29 minutes). 3. Press and release the Snooze/Dimmer Button to con...

iBN97 Using the 10 P14 Using Bluetooth: Pairing and Playing Your Device Using NFC This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play instantly. For pairing non-NFC devices, please see the following section “Pairing Your Device Using Standard Bluetooth”...

Pairing Your Device Using Standard Bluetooth 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Press the Button to turn the unit ON. 3. Press and release the Mode Button as needed until the Bluetooth indicator icon appears on the d...

Playing Audio Via Bluetooth 1. Press and release the Mode Button as needed until the Bluetooth indicator icon appears on the display. 2. Press the Play Pause Button on the unit to play audio from your linked Bluetooth device. 3. Press the – or + Buttons on the unit to go to the previous or next trac...

usb charging DC 12V 2.5A Playing Audio via Aux-In 1. Connect one end of the included standard stereo 3.5mm audio cable into the aux-in jack on the back of the unit and the other end into the headphone or output jack of your audio device . 2. Press the Button on the unit to turn it on. 3. Press and r...

Using FM Radio in Other Countries Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA:1. Make sure unit is OFF. Press and hold the Mode Button for 5 seconds until “USA” appears in the display....

Replacing and Installing Clock Backup Battery Note: The CR2450 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary p...

Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in.• Make sure your device is properly paired with the iBN97.• Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) The unit may need to be reset. To do so, disconnect the unit from AC powe...

Consumer Product Safety Guide 17 When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installat...

Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this produc...