iHome iBN4 - Manuals

iBN4 2 Included • iBN4 system • 100V-240V universal AC adaptor • 3.5mm stereo audio cable P6 power adaptor The handle of the unit can be placed in two positions, upright for carr ying, or back for general use or tilt-back play. audio cable

iBN4 Using the 3 P7 Fully charged Needs charging Battery Indicator (charge status) Setting Up the Unit The unit can be operated using the included AC adaptor or on the internal rechargeable lithium ion battery for portable use.Connect the included AC adaptor to the DC jack located on the back of the...

iBN4 Using the 4 P8 Using Bluetooth: Pairing and Playing Your Device Using NFC This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play instantly. For pairing non-NFC devices, please see the following section “Using Bluetooth: Pairing Your Device Manually”.1...

5 iBN4 Using the P9 Using Bluetooth: Pairing Your Device Manually 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Turn the Power/Mode Dial right to turn the unit ON (pairing is available in any mode). 3. Press and hold the Pairin...

6 P10 Playing Audio Via Bluetooth 1. Turn the Power/Mode Dial to the Bluetooth position (right) to enter Bluetooth mode. The Bluetooth Indicator on the display will flash and a tone will sound as the unit searches for a previously paired device, and then turn solid once a previously paired device is...

iBN4 Using the Playing Audio via Line-In 1. Connect one end of the included stereo 3.5mm audio cable into the line-in jack on the back of the unit and the other end into the headphone or output jack of your audio device . NOTE : The unit defaults to Line-in mode when the audio cable is connected. It...

iBN4 Using the FM Radio 1. Turn the Power/Mode Dial on the unit to Radio mode (center). 2. Press the or Buttons on the unit to tune in the desired station (press and hold to scan to the next clear station). 3. The unit has an external telescoping FM radio antenna; extend it gently and adjust it for ...

Resetting the Unit If the unit “locks up” or becomes unresponsive, you can reset it to factor y settings. To do so, press and hold the Button and the Button TOGETHER for 8 SECONDS . A long beep will sound, indicating the unit has been reset. Note that you will need to re-pair Bluetooth devices. Note...

10 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. ...

Consumer Product Safety Guide 11 When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installat...

Unit doesn’t respond (no power) • Make sure unit is completely charged.• Check that all connections are correct and properly plugged in.• Make sure your device is properly paired with the iBN4.• Make sure the Power/Mode Dial is not in the OFF (left) position. Unit doesn’t respond (locked up or froze...

Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this produc...