Page 2 - Table of Contents; Updating your Firmware; Getting Started; Maintenance
Table of Contents 1 2 3 4 5-6 6 7 8 9 10 Controls and indicators iA17 Quick Start Display / Installing/Replacing the Clock Backup Battery Setting up the Time Using Time Sync / Setting the Time Manually / Setting the Alarm Operating the Alarm / Playing and Charging your iPhone/iPod / FM Radio Mode Us...
Page 3 - FCC Information; Battery Information
FCC Information This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your equipment might cause TV or radio interference even when it is ...
Page 4 - Back panel
Top panel 1 Controls and Indicators Lower Volume Button Time Sync Button Press to sync clock to time on docked iPhone/iPod DST Switch Move to +1 for Daylight Saving Time, to -1 for Standard Time Adapter Jack Plug in DC adapter cable and connect to outlet to power unit Use this Play/Pause iPod/iPhone...
Page 5 - iA17 Quick Start; Time Sync
2 Insert a playing iPhone/iPod into the dock (must not be in a “skin” or case). After a moment you will hear your audio playing through the unit. The iPhone/iPod will charge while docked. 2: iPhone/iPod iA17 Quick Start Attach AC adaptor cable to adaptor jack on back of the iA17 and plug the other e...
Page 6 - Display; Installing/Replacing the Clock Backup Battery
Note: The CR2032 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings, as well as the radio station preset memory settings in the event of a temp...
Page 8 - Operating the Alarm; Playing and Charging your iPhone/iPod
5 At the set time, the alarm will sound for 1 hour. If waking to iPhone or iPod, make sure your playlist has an hour of music in it. 1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the Button or Wakeup Button . The alarm sound will stop...
Page 10 - To set sleep volume, press the or; Buttons; . Sleep volume does not effect normal or alarm volume settings.; Bedtime Button; to view the sleep time remaining. Press again to set sleep to the; Button; Color Change Mode; Color Button; Dimmer Mode
This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns the unit off. It will also turn off a docked iPhone or iPod, but will NOT turn off an audio device connected via the Aux Line-in jack, so avoid line-in as a sleep source..1. Press and ...
Page 11 - A Consumer Guide to Product Safety
A Consumer Guide to Product Safety 8 When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before insta...
Page 12 - Trouble Shooting; Solution
Trouble Shooting 9 Unit doesn’t respond(no power) iPhone/iPod cannot dock properly AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of the unit Wall outlet is not functioning Plug the AC adaptor into a wall outlet and plug the connector...
Page 13 - Consumer Repair Department; Limited 1 Year Warranty Information
10 iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 year from the date of original purchase. Should this product fail to func...