Hyundai H-CMD4012- Manuals

Page 2 - Table of contents

2 Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefullybefore connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents .....................................

Page 3 - Important safeguards

3 Important safeguards Using the device at temperature below -10º may cause the breakage of the device. Before using pleaseheat up the passenger compartment to the recommended temperature!Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.When replacing the fus...

Page 4 - Accessories

4 Accessories ReceiverRemote controllerFront panel protective cloth bagISO connectorUSB cableAV cableMounting parts:Screw (8 pcs)Key (2 pcs)Instruction manualConsumer informationWarranty card

Page 5 - Installation/Connection; Installation method 1:; DIN front mounting

5 Installation/Connection Installation method 1: DIN front mounting Install the mounting sleeve into the dashboard. Bend as many claws outward for tight fit, to lock the sleeve into the place. Install the trim frame to the unit. Use the rear mounting bolt to support the unit.

Page 7 - Electrical connection

7 Electrical connection Note: For your driving safety, please link your parking wire with low power level, and keep it controlled by manual brake switch. Wire should be high power level and the unit cannot play video disc.

Page 8 - Using the ISO Connector

8 Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectorsas illustrated. 2. For connections without the ISO connectors, check the wiring in the vehiclecarefully before connecting, incorrect connection may cause serious damage to thisunit.

Page 9 - Panel controls; Front panel; BAND button

9 Panel controls Front panel 1. POWER/SRC button 8. P.ANGLE/EJECT button 2. MUTE/LOUD button 9. BAND button 3. VOL+/ VOL– button 10. OPEN button 4. MENU button 11. PLAY/PAUSE/AST button 5. RC sensor 12. DISP button 6. AUX IN jack 13. USB jack 7. SD/MMC card slot 14. Touch screen

Page 10 - Inner panel; slot

Page 11 - Remote control

11 Remote control 1. MODE button2. POWER button3. BND/TA/SYS button4. Cursor (UP/DOWN/LEFT/RIGHT), ENTER buttons5. STOP/RETURN button6. AMS/RPT button7. ST/PROG button8. LOC/AF/RDM button9. OSD button10. PBC button11. Digit buttons12. EJECT button13. PLAY/PAUSE button14. MUTE button15. SUB-T button1...

Page 12 - Changing the battery; Press the catch and at the same time pull out the battery tray.

12 Changing the battery 1. Press the catch and at the same time pull out the battery tray. 2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control. Warning: Store the battery where children cannot reach. If a...

Page 13 - General operation; Touch panel; column and adjust it in the right column.

13 General operation Touch panel 1. RADIO button, press to choose radio mode.2. TV button, press to choose TV mode.3. DVD button, press to choose DVD mode.4. USB/SD button, press to choose USB/SD mode.5. GPS button (option).6. BLUE button (option).7. POWER button, press to turn off or on the unit8. ...

Page 14 - System setup menu; to adjust picture brightness.

14 9. AUX 1 button, press to choose AUX1 mode.10. MENU button, press to enter setting menu.11. TFT UP button, press to change the angle of the panel upwards.12. AUX 2 button, press to choose AUX2 mode.13. TFT DOWN button, press to change the angle of the panel downwards.14. EJECT button, press to ej...

Page 15 - OPEN button; Press OPEN button on the unit to release the front panel.; Reset the unit

15 9/10 to adjust picture contrast.11/12 to adjust balance between front left and right audio channels.13/14 to adjust picture color.15/16 to adjust picture sharpness.17/18 to adjust balance between rear left and right audio channels.19 DBAS – to turn on/off super bass mode. 20. MBP – to turn on/off...

Page 17 - Radio operation; Band selection; station upward or downward step by step.

17 Radio operation This unit is equipped with a touch screen. To perform various operations you can use buttons on the RC, on thefront panel as well as screen touchable buttons. When you switch on the unit, it automatically enters RADIOmode. When you are in the source menu, press RADIO screen button...

Page 18 - Store function; on the touchable screen, under which you want to store the station.; Preset scan function

18 Store function You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM). To store a station: - Select a band (if needed)- Select a station with SEEK+/SEEK- buttons on the RC.- Press and hold for 3 seconds a number button (1-6) on the RC or press the corresponding station butt...

Page 22 - Loading a disc; Some USB driver models cannot be supported by this unit.; Stop playback

22 Loading a disc Press P.ANGLE/EJECT button on the panel to flip it down. Insert the disc with the printed side facing upwardinto the slot. Close the panel. The disc will be loaded and played automatically. If the unit is in another mode,press DVD screen button, POWER/SRC button on the unit or MODE...

Page 23 - Press AMS/RPT button on the RC to select a repeat playback mode:

23 Playing the previous/next track During play press PREVIOUS/NEXT buttons on the RC or on the screen to select the next or previous track toplay. Fast forward and backward playback Press and hold for 2 seconds PREVIOUS/NEXT buttons on the RC to select the speed of fast playing inforward or backward...

Page 25 - Programming the playback; Press ST/PROG button on the RC to enter program list.; GOTO function

25 Programming the playback 1. Press ST/PROG button on the RC to enter program list. 2. Use cursor buttons on the RC to move to desired position, and digit buttons to enter the number of thedesired one to be on selected position.For DVD select title and chapter number.For VCD, CD, MP3, WMA, select t...

Page 26 - Press ENTER button to confirm.; File select; Press ENTER button to playback.; Touch screen menu

26 During playback press GOTO button, the goto menu will appear on the display. Use LEFT/RIGHT cursorbuttons to move to the needed menu item; use number buttons to input the needed number of chapter/title andthe needed time. Press ENTER button. The unit will go to playback the disc according to the ...

Page 27 - ID3 Tag information

27 This touch screen menu will appear after touching the screen in DVD mode. Press the needed screen button tochoose setting, mode or to navigate in playing mode. USB/SD/CD setup Under USB/SD/CD display mode, press ZOOM button on the RC to enter to the setup menu consisting of 4submenus: SRND (surro...

Page 29 - Notes on creating your own CD-R or CD-RW containing MP3 files:

29 Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1kHz and a fixed bit rate o f 128 kbps.Do not store more than 448 MP3 files per disc.For ISO 9660 - compliant format, the maximum allowa...

Page 30 - AUX touch screen operations; AUX mode is for video and audio input.

30 AUX touch screen operations Press MODE button on the remote control, POWER/SRC button on the panel or press AUX1, AUX2 buttonson the screen to enter the AUX mode. AUX mode is for video and audio input. 1. Exit (press the fragment 1 to exit the aux mode).2. System setup menu (press fragment 2 to e...

Page 32 - Video setup menu; Press SETUP button on the RC to display the system setup menu.

32 Video setup menu 1. Press SETUP button on the RC to display the system setup menu. 2. Use LEFT/RIGHT cursor buttons on RC to select the desired menu: System setup, Language setup,Audio setup, Video setup, Speaker setup, Digital setup. 3. Press OK to enter it. 4. Use UP/DOWN cursor buttons to sele...

Page 34 - : The audio out is Left and Right channels format even if the; Stereo; : The audio out format is stereo even if the original sound is

34 Audio setup Audio out SPID/OFF: There is no signal output from the coaxial or opticaloutput end.SPDIF/RAW: When the unit is connected with the amplifier bycoaxial or optical connecter, please select this mode.SPDIF/PCM: When the unit is connected with the two channelsdigital stereo amplifier, ple...

Page 36 - TV Operation; Arrow icon – to return to source menu.

36 TV Operation To perform various operations you can use buttons on the RC, on the front panel as well as screen touchablebuttons. When you are in the source menu, press TV screen button, or press repeatedly POWER/SRC button onthe unit or MODE button on the RC to select TV mode. In TV mode press th...

Page 38 - Rear view camera

38 Rear view camera This unit is equipped with back view camera output. The camera is used to observe the situation behind thevehicle when you are backing the car.Please connect your back view camera with the back car video input. And connect the detecting wire for back acar with the rear gear light...

Page 39 - Cleaning the cabinet

39 Handling discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temperature or dust...

Page 40 - Troubleshooting guide; Symptom

40 Troubleshooting guide Symptom Cause Solution No power The car ignition is not on. The fuse is blown. If the power supply is properlyconnected to the car accessory switchthe ignition key to “ACC”.Replace the fuse. Disc cannot be loaded. Presence of disc inside the player. Remove the disc in the pl...

Page 41 - Specification; Maximum power output:

41 Specification General Power supply: 12 V DC Maximum power output: 50 W x 4 channels Compatible formats: DVD/DVCD/SVCD/VCD/HDCD/MP3/WMA/CDDA/Picture-CD/Photo-CD/JPEG Supported disc types: DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW Dimensions (D x W x H) 185 x 178 x 50 mm ESP function: 40 sec. for Audio CD, 12...

Page 45 - DIN

Page 48 - ISO

Page 50 - RESET

Page 54 - SEL

54 : . 9. AUX1, AUX1. 10. MENU, . 11. TFT UP, . 12. AUX2, AUX2. 13. TFT DOWN, . 14. EJECT, . SETTING ( SEL RADIO), . 1/2 VOL-/+ - . 3/4 TRE-/+ - . 5/6 BAS-/+ - . 7/8 .

Page 55 - OPEN

55 9/10 . 11/12 . 13/14 . 15/16 . 17/18 . 19 DBAS – . 20. MBP – . 21. STD – . 22. LOUD – . 23. EQ – . 24. BACK – . OPEN OPEN , . , , , RESET , . POWER , . POWER POWER . VOL+/- , .

Page 59 - RDS

59 RDS RDS ( ) . , RDS , . PTY . PTY, PTY. , . , . PTY . , , . AF ( ) LOC/AF/RDM AF, AF. . , RDS . , . TA ( ) BND/TA/SYS TA, . , . CD . ST/PROG ST, .

Page 60 - LOUD

60 LOC/AF/RDM , . EQ, 3 : POP, ROCK, CLASS . LOUD MUTE/LOUD LUD, (LOUD).

Page 62 - SVCD

62 PBC ( ) – , SVCD VCD2.0. , PBC, . . – DVD- . , . , , 1, 2 3. . , . . . – . , , .

Page 65 - VCD

65 PBC ( ) ( VCD ) VCD PBC, . 1. PBC , . 2. , . LOC/AF/RDM , . DISP , ( ). SUB-T ( ). ( DVD/VCD) ZOOM . : 2 => 3 => 4 => 1/2 => 1/3=> 1/4 => . .

Page 66 - DVD; ANGLE

66 ( DVD ) ANGLE , DVD- . , . ( DVD/VCD) DVD/VCD SLOW , . SLOW : X1/2 => X1/3 => X1/4 => X1/5 => X1/6 => X1/7 => . PLAY/PAUSE, . ( DVD/VCD) BND/TA/SYS BAND, : NTSC => PAL => AUTO. 1. ST/PROG , . 2. , . DVD . VCD, CD, MP3, WMA . 3. ENTER, . 4. , ENTER. 5. ST/PROG, .

Page 70 - WMA

70 3 WMA 3 MPEG 3 . 3 CD-ROM, CD-R CD-RW. 3, , ISO 9660. 3, . 3, , “.mp3”. 3 , “.mp3”, . , “ MP3” “ ”, PC “ ” “ ” . 8, . 256. . , , 3. 8 VBR, , . VBR: . WMA . ID3 WMA , . WMA (Windows Media Audio) – , Microsoft Corporation. ,

Page 72 - AUX; MODE

72 AUX MODE , POWER/SRC AUX1 AUX2, AUX. AUX . 1. ( 1, AUX). 2. ( 2 ). : ; .

Page 74 - SETUP

74 1. SETUP , . 2. , : , , , , , . 3. , . 4. , . 5. , . 6. , , ENTER, . AUTO: , . NTSC: , , . PAL: , , . S-Video. . . 4:3 PS : , , . 4:3 LB: , , .

Page 75 - DivX

75 16:9: , . . – 0000. . . OK, . . , , , . . . . , , , DivX . , . , .

Page 77 - OP

77 : 5.1, . , . VSS ( . ): , 5.1, . OP : , RF remod. , . . : . : . : . : .