Hunter TypeB - Manuals - manualsarea.com

Page 2 - Welc om e; Your new Hunter; Cautions and Warnings; READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING; • To avoid possible electrical shock, before installing your fan,

2 41847-01 • 05/28/10 • Hunter Fan Company Table Of Contents Preparing the Fan Site . . . . . . . . . . . . . . . . . 3 1 • Getting Ready . . . . . . . . . . . . . . . . . . . . . . 6 2 • Installing the Ceiling Plate . . . . . . . . . . 7 3 • Assembling and Hanging the Fan . . . 8 4 • Wiring the Fan...

Page 3 - Step 1 - Choose the Fan Site; Choose a fan site where:; Checklist for Existing Fan Site; Pre parin g th e Fan Sit e

3 41847-01 • 05/28/10 • Hunter Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From Wall or Nearest Obstruction Step 1 - Choose the Fan Site Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and...

Page 4 - Step 2 - Cut the Ceiling Hole; • Installing the

4 41847-01 • 05/28/10 • Hunter Fan Company Pre parin g th e Fan Sit e (c ontinu ed) CAUTION: All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70 . If you are unfamiliar with wiring, use a qualified electrician . Steps 2 – 3 Step 4 Step 5 Step 2 - Cut the Ceilin...

Page 5 - Inst al ler’s Choice and O ptional Ac ce ss orie s; Understanding Mounting and Installer’s Choice; To

5 41847-01 • 05/28/10 • Hunter Fan Company Inst al ler’s Choice and O ptional Ac ce ss orie s Understanding Mounting and Installer’s Choice ® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease . You can install your Hunter fan in one of three ways, de...

Page 6 - To install a ceiling fan, be sure you can do the following:; Gathering the Tools; You will need the following tools for installing the fan:; Checking Your Fan Parts; Installing Multiple Fans?; • Gettin g R eady

6 41847-01 • 05/28/10 • Hunter Fan Company To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling .• Drill holes for and install wood screws .• Identify and connect electrical wires .• Lift 40 pounds . If you need help installing t...

Page 7 - • Inst al lin g th e C ei lin g Pl at e

7 41847-01 • 05/28/10 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location . If you cannot lock the circuit breakers in the off position, securely f...

Page 8 - For Standard or Angled mounting:; • A ssemblin g and Han g in g th e Fan

8 41847-01 • 05/28/10 • Hunter Fan Company Steps 3-5 – 3-6 Low Profile Screw Low Profile Washer Steps 3-2 – 3-3 Downrod Canopy Canopy Trim Ring Setscrew WARNING: Fan may fall if not assembled as directed in these installation instructions . 3-1 . Unbundle the wires from the fan . For Standard or Ang...

Page 9 - Dual Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black wire; Single Switch Wiring:; • The black wire (ungrounded) from the ceiling to the black; ceiling plate into the outlet box .; • Wirin g th e Fan

9 41847-01 • 05/28/10 • Hunter Fan Company All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included . Select an acceptable general-use switch in accordance with national ...

Page 10 - • Inst al lin g th e C anopy and C anopy Trim Rin g

10 41847-01 • 05/28/10 • Hunter Fan Company 5-1 . Holding the canopy, raise the fan off the hook .5-2 . Align the slots in the canopy with the tabs on the ceiling plate .5-3 . Raise the canopy over the ceiling plate . Rotate the canopy clockwise until the tabs on the ceiling plate totally engage wit...

Page 11 - • A ssemblin g th e Bl ade s

11 41847-01 • 05/28/10 • Hunter Fan Company Step 6-1 (Detail) Grommet Blade Assembly Screws Use with grommet Use without grommet Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan) .6-1 . Your fan may include blade grommets . If your fan has grommets, insert t...

Page 12 - assembly screws into the switch housing mounting plate .; If you do not want to install the light fixture; , proceed to “Installing

12 41847-01 • 05/28/10 • Hunter Fan Company Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button . This feature gives you the option of installing the fan with OR without the included light fixture . The steps below direct you whether or ...

Page 14 - Installing the Light Fixture

14 41847-01 • 05/28/10 • Hunter Fan Company Installing the Light Fixture 7-9 . Remove the switch housing cap and plug button from the lower switch housing . 7-10 . Push the wires from the light kit through the hole in the center of the lower switch housing . 7-11 . Screw the threaded rod of the ligh...

Page 15 - Installing the Glass Bowl; -21 . Place the cover plate up against the

15 41847-01 • 05/28/10 • Hunter Fan Company 7 • Completin g Your Inst al l ation With or Without a Bow l Li g ht Fi xture (Continu ed) Installing the Glass Bowl 7-16 . First install B10 candelabra bulbs (60 Watt Maximum) into the sockets . 7-17 . Attach the extra pull chain (included) to the fan pul...

Page 16 - • The chain uses a breakaway connector that separates if the; • O p eratin g and Cleanin g Your C ei lin g Fan

16 41847-01 • 05/28/10 • Hunter Fan Company In warm weather , use downward air flow pattern In cold weather , use upward air flow pattern 8-1 . Turn on electrical power to the fan .8-2 . The fan pull chain controls power to the fan . The pull chain has four settings in sequence: High, Medium, Low, a...

Page 17 - Problem: Lights shut off suddenly, but fan is still operating; the MAX wattage sticker affixed to the light socket .; • Trouble sho otin g

17 41847-01 • 05/28/10 • Hunter Fan Company Problem: Nothing happens; fan does not move. 1 . Turn power on, replace fuse, or reset breaker .2 . Loosen canopy, check all connections according to the wiring the fan section .3 . Check the plug connection in the switch housing .4 . Push motor reversing ...