Hunter TYPE 2 - Manuals

Hunter TYPE 2 – Manual in PDF format online.

Manuals:

Manual Hunter TYPE 2

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 3 - FINAL WIRING; PHILLIPS ROUND HEAD SCREWS HALFWAY INTO THESE HOLES. SEE FIGURE 7.; FINISH FAN ASSEMBLY

REV: 5/94 FIGURE 7. CANOPY CEILING PLATE MOUNTING SCREW (3) MOUNTING SLOTS (3) SEE FIGURE 7A. MAKE CERTAIN GROOVE AND TAB ARE ENGAGED BEFORE RUNNING FAN. FAILURE TO DO THIS COULD RESULT IN THE FAN FALLING. IN CANOPY. FOR THE HANGING FAN CONFIGURATION, ROTATE FAN UNTIL GROOVE IN BALL IS POSITIONED OV...

Page 4 - BULB AND GLOBE INSTALLATION

REV: 5/94 MOUNT BLADES TO FAN WITH WOOD PADDLES LOCATED UNDERNEATH BLADE BRACKETS. UNTIL SOUND HAS DISAPPEARED. NOTE: SHOULD GLOBE EMIT ANY SOUND WHEN FAN IS RUNNING, RE-ADJUST 3 GLOBE MOUNTING SCREWS POSITIONED ON THE OPPOSITE SIDE OF THE BLADE IRON. SEE FIG. 8. VIBRATION OR WOBBLING. BLADES SHOULD...

Page 5 - TROUBLESHOOTING GUIDE; SPEED CONTROL; SWITCH TO THE OPPOSITE POSITION AND SWITCH FAN BACK ON. SEE FIGURE 9.; OPERATION OF FAN

C 1989 HUNTER FAN COMPANY REV: 5/94 5. RE-ADJUST 3 GLOBE MOUNTING SCREWS. 5, GLOBE IS VIBRATING AND EMITTING NOISE. * 1. USE BALANCING KIT (SEE STEP 8C).2. LOWER OR MOVE FAN.3. TIGHTEN ALL SCREWS.4. TURN POWER OFF, SUPPORT FAN VERY CAREFULLY, LOOSEN CANOPY AND HANG CORRECTLY. 4. CHANGE TO APPROVED S...

Hunter Manuals